PGP mods and stuff - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 09-16-2001, 04:07 AM #1
Jamescoop
 
 
Join Date: Jul 2001
Location: Yay Area!, CA
 has been a member for 10 years
PGP mods and stuff

yea well, i love my pgp but its getting worn, so im thinking of stuff to do to it.

First i think im going to make it semi auto i think i will mount a cocker 4 way in the grip frame undee teh sear so when i pull the trigger it closes teh valve, however the hoses will be switched so it will actually open the valve to the ram. then ill solder on a prat with the ram thread on it so i can use different rams, and then ill tap the side of the body for the regulator. Any comments/ideas??


also wanted to mill the fed tube so that i could put a spring and lever in to force fed the balls. any ideas/comments?

also, post what u have or what u are ging to do to ur PGP
Jamescoop is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 09-16-2001, 04:10 AM #2
Jamescoop
 
 
Join Date: Jul 2001
Location: Yay Area!, CA
 has been a member for 10 years
o yea, how would i make an actual Bolt for it? i want to make it very accurate and im thinking a venturi style bolt, but the only problem is that my stock bolt is jsut a ball thing, the air comes frmo underneath the ball to shoot it out.

any comments/suggestions? how is the cooper-t better bolt?
Jamescoop is offline  
Old 09-23-2001, 07:34 PM #3
Punsher
 
 
Join Date: Aug 2001
Location: Wet and Rainy Oregon
 has been a member for 10 years
it's not quite that simple

but you're on the right track.
Use the bolt you have, it works just fine.
Running the 4-way from the sear is a pain and very hard to time, I'd say you're better off running the 4-way in a more conventional method.
Good luck
__________________
Have a great day!
Lee Kinney aka Punisher
Punisher's Customs
"Because the dead-box is a lonely place"
Punsher is offline  
Old 09-24-2001, 12:19 AM #4
Skyssx
 
Join Date: Mar 2001
Location: Fort Gordon GA
 has been a member for 10 years
You can't venturi bolt a pgp unless you move the feed port, or make one with a sliding pump lug that has an extra half inch of travel. Either way is not a pretty solution. Besides, venturi bolts do NOTHING for accuracy anyways.
Skyssx is offline  
Old 09-24-2001, 08:53 PM #5
Jamescoop
 
 
Join Date: Jul 2001
Location: Yay Area!, CA
 has been a member for 10 years
well i believe that they do, and its personal preference. i know i would havta get a longer pump arm.

punsher- would a cocker stock frame work if i put the four way behing the plate and then reversed the hoses?
Jamescoop is offline  
Old 10-03-2001, 04:52 AM #6
Punisher's Customs
Airsmith to the GODS!
 
Join Date: Sep 2001
Location: Wet and rainy Oregon
Punisher's Customs is a Supporting Member
 has been a member for 10 years
Oops.....missed this one.....

Yeah, if you mill the cocker frame adn trigger to fit the Pgp body, then you can mount your 4-way to the exterior.....
I've done a couple that way....
__________________
Have a great day!
Lee Kinney aka Punisher
www.punishers-customs.com
"Because the Dead-Box is a lonely place."
Punisher's Customs is offline  
 




Posting Rules
Forum Jump