[Diametunim]

Hey, I have a problem with my G3 manual (I think.) I'm changing my o-rings on the internals in my gun. However the manual says the front O-ring on the bolt guide is a 15.8/1.9 Oring.

I put the o-ring on the guide and re assembled my G3 however I noticed the 15.8/1.9 Orings that came with my rebuild kit(DP's) are hard and frim and not soft and squishy like normal orings.

I don't think this is the right o-ring because w/e I gas up the marker there are no leaks but the bolt will not move. There is a tremendous amount of friction between the bolt guide and the bolt.

Any ideas?
-Battery is fresh.

[jlj37592]

lube the hard and firm one....

[idontknow2007]

Originally Posted by jlj37592

lube the hard and firm one....

that just didnt sound right...

[Diametunim]

Originally Posted by jlj37592

lube the hard and firm one....

Haha, can't say I didn't lol.

I should add the oring was lubed and there was still a good amount of friction.

[disturbed989]

Originally Posted by jlj37592

lube the hard and firm one....

thats what she said

[rottensquad07]

The bolt has a 015 on the front, a 1.9 x 13.8 for the 2nd o-ring, and a 1.9 x 15.8 for the sail o-ring. The 1st, and 3rd orings are a softer 70 duro. That 2nd o-ring is also used on the bolt guide. Does that make sense?