Well, as some of you may know, this has been an on oing battle of demented and me vs. usps. Which in the end, we won, at the cost of 6 rammers.
Anyways, on to the review.
Firts Thoughts:
The first thing i noticed as i pulled the envelope out of my mailbox after school taday, it was feather light. No exact measurements now, will probably get some soon, but just comparing it to my stock ICDU rammer, well, its not even comparable how light this thing is.
Weight:
As mentioend above, its such a drastic difference, yes it is deffinatly noticeable, not much more to say bout this as of now.
Looks/Quality:
Just by feeling it and looking at it, I can tell he really put some time into this. Very nicely machined. Only problem i had with it was, the oring groove wasnt deep enough, and it wouldnt slide in the ram housing. This was fixed by about 2 mins. with my dremel, and its perfect now.
Kick increase or decrese:
Two words: What kick?
Noise increase or decrease:
A little louder, but i could honestly care less.
Pressures:
My HPR is at 300, lpr at 70-80 area, and my promaster has never shot better .
I'm glad to know you finally got one, it'd be funny if you had the other 5 arrive soon.
And i'll have to tell him that he needs to make the oring grooves deeper, someone else said they weren't deep enough, but with a dremel or file it can be fixed.
*Remember this was mainly meant for an AAV, but lets get soem results, i can't get any myself until 3 wks from now, but it's not going to be a day for results, just a day of fun.
Higher bursts at one time so the rammer doesnt have to hit as hard. Also, the lpr is actually 70 still, unsure of consistency because of lack of crony, but it did feel a little high. efficency was 250psi per hopper.
.
Let us know how it goes 
