[StrangeBalla55]

no. Had to solder wires to the leads of the board. then solder the connector to the individual eyes.

[WGP WORRACLE]

who did you have mill the body?

[StrangeBalla55]

I did it my self: heres some pics i took along the way.

[pjw2013]

I am a little confused on how to make the shego,
I have the things listed, what else do i need to make it have eyes also,

http://www.*******************/detail.aspx?ID=3099 Ego Grip Fram with Trigger, Electrons

http://www.*******************/detail.aspx?ID=1272 Ego Soleniod

The Shocker body only has what is seen in pic I ordered it like that b.c I figured I wouldnt need any of the other parts or do I?
http://img.photobucket.com/albums/v6...ockerbody2.jpg

Thx

[StrangeBalla55]

first upload the pics to a image hosting place like the body. Then you need some one to mill the eyes, and holes in the frame.

[pjw2013]

I currently own a shocker sft and have double of every part except the Soleniod. I am planning on buying everything I need at once so I am trying to get a list of it all, What I posted up earlier was links to site but im hostiing the pics to it now, Also do you have to have a LPR for it to work or no?
I have not bought either of these im just trying to get a list, then getting the money then buying and making
Soleniod


Frame


Shocker Body

[StrangeBalla55]

no lpr. Just need the noid, frame( and all the other ****). some one to mill the frame to mount to hte body, and some one to mill the eyes(not needed).

[pjw2013]

Since I will be using the ego niod i wont have to do as much modding as if i where to be using the shocker noid. Also basiclly a w.o eyes shego all i would need to do is cut holes for screws, trigger and va correct or no i looked in thing and im a little confused. Also I cant find what to do to make eyes What eyes should I use the Timmy ones and Since the shocker on has one eye place i only need one eye or 2?

[StrangeBalla55]

why do you need to cut holes for VA and trigger?

You can use DM/timmy eyes.

[pjw2013]

oh my bad i thought it said do that but do i just have to do the soldering to get them to work

[atomix1010]

how do i mill the frame for bb eyes and how long does it take from start to end? Also is it very difficult?

[StrangeBalla55]

you dont mill the frame for BB eyes. It took me about 8 hours of milling frame wise. It can be hard if you dont know what you are doing.

[atomix1010]

wat do i have to do for the eyes like in terms of milling whats the least i have to do and can it be done with just a dremel?

[Mr. Speed]

Props man, that thing is wicked! Is there no way I ould use the shocker eyes? Or the blade's eyes? What two wire should I solder. Man, it's way too late for this much thought........

[StrangeBalla55]

I would not have the eyes milled with a dremel. Even though i did, it was very hard.

You can not use shocker eyes, they have to be either DM/Timmy. However if you had the tools, you could you NXT etes, and either split the ends and solder wires to them.

[Mattejo91]

Thanks Strange baller. Just finished mine and my only refference was this thread. THANKS. I did not decide to put eyes in but i am using an rf chip. I will post picks when I have a chance to upload them. btw where do you get your annoing done

[jaytheguy]

what frame did you use? like 05, 06, star? pm me i have a couple questions about this also

[StrangeBalla55]

it was a 05 stock frame. I milled it for the button pad

[B2k4baller]

that is sweet, a work of art, although you have to have guts to mess up that gun like you did

[p3t3ycrak9]

Great instructions ...I'm planning on starting this project myself but I don't know where I can get the parts...like the frame or the electronics...can u pm me with some links plz...it would b greatly appreciated

[Empire03]

umm strange can u post a pic of the milling done to the end cap of the shocker noid plz i don't wanna cut to much off