[Invisionist11]

Recently I went to my local field and played with reballs. I constantly had problems with my vlocity jr. with gangstar feeding them, I had to completely empty my hopper and put in all new balls for it to load correctly. I was wondering what setting do you think would be the best for reballs? Would you want a lot of tension, or very little tension?

[justavillain]

if you crack some paintballs and lube up the loader. But I think little pressure on the stack would help more then a lot. Since they usually jams while they're feeding.

[wheeze40 (Banned)]

my vljr would flash red and stop loading. i found the problem was the same with monster balls.the ball would get smoshed between the impeller arm and where it goes into the load raceway. happened numerous times. you can try different tension settings but i just gave up i didn't want to ruin my new loader.and i have the gangstar spring just to let you know. my tension is on 2. i heard getting the feed cone from the xsv model will solve those problems but can't find where to but it. good luck

[Da Punk Kid]

i talked to a tech at boston, he said the clockspring propellor will be out shortly for seperate purchase

[VIP3R]

Originally Posted by Da Punk Kid

i talked to a tech at boston, he said the clockspring propellor will be out shortly for seperate purchase

and i hear everyone with one in the xsv loaders are breaking them

[theultimatehero]

Ive tried my Vlocity vs a modded eggy 2. And the modded eggy would usually beat the vlocity using reballs. They just dont jam. The vlocity is good at recovering after a jam but with the eggy there is no reason to recover.

Eggy=best reball hopper imo

[The_Lead_Factor]

Originally Posted by theultimatehero

Ive tried my Vlocity vs a modded eggy 2. And the modded eggy would usually beat the vlocity using reballs. They just dont jam. The vlocity is good at recovering after a jam but with the eggy there is no reason to recover.

Eggy=best reball hopper imo

Because it's "semi force-fed"