how many people?

amhildreth · 12-29-2006, 05:26 PM

I still own (and use) a few early runners. A pre-serial Illusion Pro, and my newest baby - a first-run Diadem. Whoo!

XcharlieMANSON · 12-29-2006, 08:37 PM

im considering trading my dits for a stock class phantom.

Fryloc · 12-30-2006, 10:03 AM

Quote:

Originally Posted by XcharlieMANSON

how do you get the ram out? do you slide the cover off then what?

Been awhile since I took mine apart... the QEV comes off, there should be a o-ring or something to seal it, the cap comes off, and the ram unscrews. Pull the bolt pin and I think that's it. It should slide out easy. Splatttt did some write ups on making it better, it's sticky-ed at the top of the forum.

splattttttt · 12-30-2006, 08:11 PM

I haven't owened a semi for quite some time, that's why I have a Senti on its way over to me.
I may end up turtleling it, and attaching a CCM pump kit on it eventually. No better semi out there worth this conversion in my honest opinion.

XcharlieMANSON · 12-30-2006, 08:13 PM

how much is it 2 put a pump kit on my senti?

splattttttt · 12-30-2006, 08:37 PM

I've yet to investigate the change. Trust me though, it's doable. The half block will be very technical.

hopelessandsic · 12-30-2006, 09:03 PM

Eh, they were all made from one extrusion, it shouldn't be terribly hard to convert the senti.

GTRsi · 01-01-2007, 09:55 PM

I just bought an illusion. are there any parts that are specific to the illusion. Are there any parts that cannont be sourced from a sniper??

boomslang · 01-02-2007, 11:20 AM

Internal diameters are not the same. This means a valve swap is not possible.

cockerpunk (Banned) · 01-02-2007, 04:30 PM

Quote:

Originally Posted by GTRsi

I just bought an illusion. are there any parts that are specific to the illusion. Are there any parts that cannont be sourced from a sniper??

i belive the only parts that can be are barrels and bolts. it fits 99 spec bolts.

everything else is unique.

G|zmo · 01-04-2007, 03:25 PM

Still got a my Illy

Fryloc · 01-05-2007, 10:45 PM

Quote:

Originally Posted by cockerpunk

i belive the only parts that can be are barrels and bolts. it fits 99 spec bolts.

everything else is unique.

I'm not sure about the bolts, but the feed necks are Angel threaded.

Newb10 · 01-07-2007, 02:42 AM

i could use a couple spare bolts, that plexi glass piece that shows the board and the screws and maybe a rammer for the dits

WinterGS · 01-09-2007, 08:29 AM

Still have 2 DITS here, mine and the Wifes. Shes got one of the unnumbered protos. Plus a teardrop Senti. The teams (House and Speed) have about 14 DITS between them, all of them running with minor problems. Chyna has a Senti too, uses it as a back up.

splattttttt · 01-09-2007, 03:31 PM

I just picked up a used SC Illusion.
It's been tough trying to play SC with anything else during the winter.
Illusions are the only pumps that can make use of 12g here in the North East in Winter.

OneUp · 01-09-2007, 10:44 PM

I have splatt's DITS

splattttttt · 01-10-2007, 08:10 AM

Quote:

Originally Posted by OneUp

I have splatt's DITS

Wow! That beast is making it self known.
What's it look like these days? Is that oring still glued to the bolt?

OneUp · 01-11-2007, 07:34 AM

I haven't done anything to the bolt other than triflow it ever since I got it.

has palmer stab, and this drop http://www.pbreview.com/products/reviews/1799/

totdoc · 01-11-2007, 09:39 AM

Haven't been on the forums much, but my Diadem is still going strong. These days, I have my DITS, a PM5, and a highlander viking - and I still play with my Diadem with some regularity. It's just a great gun!

splattttttt · 01-11-2007, 08:09 PM

Quote:

Originally Posted by OneUp

I haven't done anything to the bolt other than triflow it ever since I got it.

has palmer stab, and this drop http://www.pbreview.com/products/reviews/1799/

Triflow? What's that?
Hey? What's up doc?

TwoUp (Banned) · 01-12-2007, 09:27 AM

delrin-safe oil for orings.