Dip switch settings - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 09-03-2001, 04:01 AM #1
Dism219r
 
Dism219r's Avatar
 
Join Date: May 2001
Location: Los Angeles
Dism219r is a Supporting Member
 has been a member for 10 years
Dip switch settings

Once i do the low pressure mod, what should i set the dwell, eye, and all that other jazz at. I would be using the dip switches, not the lcd buttons. Thanks
Dism219r is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 09-04-2001, 02:21 PM #2
IanR
Shoot.Kill.Win.
 
IanR's Avatar
 
Join Date: Apr 2001
Location: Philadelphia
 has been a member for 10 years
dwell should be set at 16 or 18 not sure which is best..
these are the settings
DIPS 6-8(dwell)
off,on,off -16 ms
off,off,on-18ms
DIP 9(eye)
off(1ms)
your low pressure reg should be set at exactly 85psi and your inline i would start at 170 and use a chronograph to work from there. goodluck
__________________
2k1er...FTW

Slowly getting back into paintball...
IanR is offline  
Old 09-04-2001, 02:22 PM #3
Mag Master 21
Residential Dyno Queen
 
Mag Master 21's Avatar
 
Join Date: Jul 2001
Location: Florham Park, NJ
 has been a member for 10 years
Mine runs with the settings at:
off, off, off, on, on, off, on, on, off, on.

This gives me Semi Auto (off, off, off)
@14bps (on, on)
Dwell at 14ms (off, on, on)
Eye at 1ms (off)
Tourny Lock Engaged (on)

**If you put the tourny lock on. You cannot change the Rate of Fire or the Dwell from the LCD**

My LPR is set at 85, and my input pressure is about 175.
Hope this helps.
__________________
"You and I have the courage to say to our enemies there is a price we will not pay, there is a point beyond they must not advance.. You and I have a rendezvous with destiny, we'll preserve for our children, this the last best hope of man on earth or we'll sentence them to take the last step into a thousand years of darkness."
- Ronald Reagan

Last edited by Mag Master 21 : 09-04-2001 at 02:24 PM.
Mag Master 21 is offline  
Old 09-04-2001, 03:18 PM #4
Dism219r
 
Dism219r's Avatar
 
Join Date: May 2001
Location: Los Angeles
Dism219r is a Supporting Member
 has been a member for 10 years
Hey guys thanks alot for the help i really appreciated you guys trying to help me out. Also so once i get the lpr set to 85 and my inline to about 170 i just adjust my velocity through my inline reg. Thanks
Dism219r is offline  
Old 09-04-2001, 10:57 PM #5
IanR
Shoot.Kill.Win.
 
IanR's Avatar
 
Join Date: Apr 2001
Location: Philadelphia
 has been a member for 10 years
yup but use very small increments to lock down that pressure
__________________
2k1er...FTW

Slowly getting back into paintball...
IanR is offline  
Old 09-04-2001, 11:00 PM #6
Vern1
Timmy - WooHoo!!
 
Vern1's Avatar
 
Join Date: Apr 2001
Location: Pettytown, Texas
Vern1 is a Supporting Member
Vern1 is a founding member
 has been a member for 10 years
Vern1 helped look for balloons
Greetings,
Check the two wires coming out of your soleniod.
If they are both black, set the dwell to 6ms.
If they are black and green, start with 16ms.
Go here for complete instructions:
www.pettypb.com/timilp.html
__________________
Cheers,
Joe Petty
Original Timmy Whisperer, Voider of Warrantys and Healer of Unicorns.
Petty Paintball - www.pettypb.com
Vern1 is offline  
Old 09-04-2001, 11:07 PM #7
Omega6_Virus
Distributor of Pain
 
Omega6_Virus's Avatar
 
Join Date: Apr 2001
Location: Wi
 has been a member for 10 years
The basic 5 page manual has settings for the DIP switches. Make sure you use the correct ones depending on which board version you have.
Also get the new manual and they have a nice diagram of the switches.
__________________
Dragon Intimidator
MacDev Conquest 68/45
Omega6_Virus is offline  
 




Posting Rules
Forum Jump