Height of the feednecks?

supafast · 11-22-2006, 02:11 PM

mine came off easy, just use some lube on the threads

ProtoxxPaintball · 11-22-2006, 02:49 PM

If your going to be heating up the breech, I would suggest taking the gun apart and taking the SFT oring out. It seems to me like the heat will swell it.

What I did to get mine off was used a strap wrench and put it into a vice, came out without a scratch on it.

splatter_tactics · 11-22-2006, 03:13 PM

i tried a strap wrench already, but i didnt use a vice, ill try that, but are you sure that heating it up with a hairdryer wont damage the breech (obviously i would have taken the gun apart)

Wayneo · 11-23-2006, 01:19 AM

There has to be more then one person with the above feednecks with a ruler or other measuring device.

Anyone?

jakiechan · 11-23-2006, 03:48 AM

ill do it when i get home from work...

Wayneo · 11-24-2006, 06:55 PM

Come on guys I know there are some of you out there with a ruler that can measure the height of your feedneck.

Only 3 more to measure!

Help a brother out here.

SiksPak · 11-24-2006, 07:21 PM

XSV feedneck = 1 1/8 inch