velocity creep - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 05-08-2001, 01:20 AM #1
Dust
 
 
Join Date: May 2001
Location: Fredericksburg, VA
 has been a member for 10 years
Unhappy

I think I have a slow velocity creep in my 2000 lcd angle-
What could the problem be? I use a preset tank at 800 psi.
Thanks-Dust
Dust is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 05-08-2001, 08:42 AM #2
DarkRipper
Elite
 
DarkRipper's Avatar
 
Join Date: Apr 2001
Location: VA
Annual Supporting Member
DarkRipper is a founding member
DarkRipper is BST Legit
DarkRipper donated to help Peyton Trent
DarkRipper owns a Planet Eclipse Lv1
DarkRipper is Boss
Try taking your minireg apart and cleaning the goop out of it. Also check your orings throughout the gun for nicks.

Finally, some of the miniregs came with the internals set up wrong. There are diagrams at AOG that show how to set it up right.

You may want to have an angel tech check it out if you don't know how to do that stuff.


DR
__________________
My old feedback
My new feedback

old school PBC admin... keeping it real


Please read and rate my reviews! =) ---> Here!
DarkRipper is online now  
Old 05-08-2001, 10:04 AM #3
angelusr
 
 
angelusr's Avatar
 
Join Date: Feb 2001
Location: California
 has been a member for 10 years
You're going to want to have your Tank pressure checked, make sure that is not spiking. You're also going to want to have your minireg and LPR pressures checked.

Tank PSI=800psi
Minireg PSI= 400psi(if LCD) 475psi(if LED)
LPR PSI= 85-90psi
__________________
-The Edge Is Strong-
angelusr is offline  
Old 05-09-2001, 12:46 AM #4
widdow
"Child of the fall"
 
widdow's Avatar
 
Join Date: Apr 2001
Location: Paso Robles
 has been a member for 10 years
My friend had this prob at the pan am LA, the bonebrake guy told us how to fix it. The on off pin depressor can be screwed in too far restricting air flow, after sitting for a moment the pressure will creep back to normal, you shoot and it drops the pressure down again, then the cycle repeats. The solution is to screw the pin depresson in JUST until the air starts to flow to the gun then turn it 1/4 more of a turn. You should be set. Or you can buy a good ajustable
__________________
ZERO TOLERANCE
Animalpaintball.com
thempn.com/zerotolerance
widdow is offline  
 




Posting Rules
Forum Jump