This is to finally the end of all the questions
And I edited it since you guys were getting mad at me
This was created by J.S.W and then edited by me
Ok here what I did to make the Hitman Mod
, this mod
is very easy and you can do it with every pump kit that I know of, it won't take you any time at all.
The reason this mod
is so good is because you can hold the reg and pump without taking your hand off the reg and semi players hold the reg all the time so if you are switching to pump this will make it really easy to play it. But not everybody likes this mod
so it's diffrent from person to person.
#1 Get a nice piece of metal off a hanger or go to Lowes they have really nice metal to do this.
#2 now you have to straiten out the metal (I used a vice for this)
#3 now you start to bend the metal bend it right down the middle
#4 now you got your shape
#5 is a side view now if you want you bottom end bent out a little bit put it in the vice and do so because this will make shure your hand won't slip off.
#6 is also a side view put the two top ends in the vice (you want you ends that you are going to stick in to you pump to be about 1/2 to 3/4 an inch long) and bend the top two bars at a 90 degree angle like the pic so it will be the right way when you put it in.
#1 you want to drill you holes evenly use a bit a little smaller then the with of you trigger (I used a drill press or a handheld drill can do the same thing) make sure they are even and they are the same depth
#2 shows the 2 hole that have been drilled
#3 now put in you trigger (if it those don't go in all the way you might want to make you holes a little deeper)
#4 now you’re almost done put a little glue in the hole (a little) and put the trigger in wait tell it dries and you done