[ballbusters86]

just got in my timmy and shot it today and it chopped like 10 balls out of 200, whats wrong

[FIK]

Check for obstructions in front of the eye, make sure that the eye wasn't in bypass mode, check the wires leading into the eye and make sure that they are in perfect condtion all the way back to the board, make sure that they aren't pinched when you put the gun back together, make sure you dont have the recalled eyes.

[ballbusters86]

how do i know if i have the recalled eyes?

[FIK]

If you look at your eyes, you should have one black and one silver, if they are both silver, call delta and the will give you new ones.

[ballbusters86]

nope that wasnt it, one is black and one is silver, i think it might have been that the eye was in bypass, then i chopped once and changed it to 1

then it might have been that there was paint covering the eyes after i chopped that first time. but what would you say i should set the number at on the LCD screen? i wil probably set it at one but what do you think it should be at?

thanks

[FIK]

if you mean the dwell on the eye, delta recommends 2 ms, and you should change that in the dip switches, so that it will always boot up like that and you wont have to change it every time.

[ballbusters86]

ok i will change it to 2 ms tomorow then and see if it works.

thanks for the help

[gatorchris]

I think the only option in your dips is 1, and that should work fine with a revvy.

[ballbusters86]

Thanks everyone,

i played today and didnt break once, i think the problem was what i said above.