[cheriselover101]

all my onys does is break paint!! and its like its chopping cuz all the paint is in the chamber not the barrel!! someone HELP!!

[daveczrn]

see if you can lower the LPR someand up the dwell... being the gun can shoot 30bps it's harder on paint. or you can just use a ball that has a harder shell.

[Calin]

Are you sure you eyes are on?

And also I broke every ball in my barrel once and realized that it was my batch of paint. What kind of paint are you shooting?

[the incubus]

What loader are you using?...

Try using a VLocity if you can and see what that does. If the same problem persists, you may want to look at your regs to make sure everything is O.K.



ROB.

[rip baller]

mine was chopping like mad finally i had it so i took off the bolt front and used my drill press to drill a pocket into the bolt so that the ball could roll back some since then i havent chopped a ball yet.will post pics later

[orbitaldeath3]

The bolt should be adjusted through the middle screw on the backplate. Maybe your bolt position is too forward or too far back making your gun chop. is it 1/32 of an inch for the onyx as well?