POST HERE! POST HERE! POST HERE!
http://www.pbnation.com/showthread.php?t=1792980
http://www.pbnation.com/showthread.php?t=1792980
http://www.pbnation.com/showthread.php?t=1792980
http://www.pbnation.com/showthread.php?t=1792980
http://www.pbnation.com/showthread.php?t=1792980
Smart Parts 2003 Vision Shocker SFT (black)
- Smart Parts Nerve Board
- Smart Parts Freak Barrel (pewter)
NEW! - 14in. All American Front (pewter)
NEW! - .689in. Stainless Steel Insert
- Smart Parts Standard Trigger Frame (black)
- Smart Parts Flex ACE Cover (blue)
- Smart Parts Delrin Bolt Sleeve (white)
- New Designz V3 Stinger Bolt Kit (blue)
- New Designz Adjustable Floating Bolt Guide (blue)
- New Designz 15º Vertical Adapter With Gauge Port (black) - Dye 300psi. Mini Gauge
NEW!
- Custom Products Shorty Regulator (black/blue/dust black) - 90º Swivel Macroline Fitting
- Critical Impact Trigger (black)
NEW! - Critical Pro-Pin
NEW!
- CCM No-Pro Clamping Feedneck (black/blue)
NEW!
- Kila SIX Ball Detents (black)
NEW!
- Dye Standard Sticky 3 Grips (blue)
- Parker K4H03 Solenoid - Evolve Ported Stainless Steel Manifold
NEW!
- Parker Parflex Macroline (black)
NEW!
- Extras: Wire Harness, Vertical Adapter O-Rings, Manifold O-Rings
Description:
I am not the original owner. Bought it used not long ago. Hasn't gotten much use in my hands. A lot of the parts are new or in like new condition bought by me. I completely cleaned and relubed the entire marker with Slickoleum/MUGGs lubricant. Shoots nicely. Last I checked, 3 full Halos per 1,500psi. (about 1,500 shots per 68/45 fill, good for Shockers) and it can be tuned better. Body has scratches from the past owner. Small knick to the side of the Non-Vision side detent because I couldn't get the old detents off and I accidentally slipped with my dremmel. Also, one of the screws that hold the solenoid to the manifold snapped, threading is still in the manifold but can most likely be unscrewed with pliers, manifold should not be stripped. Still shoots with no leaks, but once we make a deal, I will order the needed screw and have it sent to you if you want. Please pay attention to the colors.
Pictures:
These are old. Can get new ones if requested. List of changed visible parts since pictures were taken: Barrel (now pewter), Feedneck, Regulator (now black/blue/dust black Shorty), Vertical Adapter, Trigger, Gauge, Detents.
____________________
Price:
$550.00 OBO
What I Want: Black/Blue Themes Preferred!
- Vikings!!!
- Cyborgs!!!
- Egos!!!
- Anything sick
I have little cash so me adding a good amount is pretty much out of the question. However, you should be able to add depending on your offer.
What I Don't Want:
- Just offer up, I'll let you know.
____________________
Payment Methods:
PayPal (preferred)
Check
Money Order
Rules:
I do not ship first!
We keep bottomline setups! Not definite.
Once payment has been received, package will be shipped!
Not willing to part unless I am given an amazing offer!
No flaming! If you have a problem, PM me!
Free ups accepted.
Contact Info:
AIM - xPiZZeRx
Email -
xPiZZeRx@Hotmail.com
PBN - Throw me a PM!
Reply here first before contacting me else where!
Member Info:
PBN Feedback
SPPF Feedback - Contact Me!
I am a well known
Moderator at
www.Paintball-Forum.com (PBF), so you know where to find me.
Thanks for checking out my thread.
