Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

Reply
 
Thread Tools
Old 10-01-2006, 11:26 PM #1
flight cancled
Engineering your BAN
 
flight cancled's Avatar
 
Join Date: Jan 2005
Location: RPI- Troy NY
flight cancled is a Supporting Member
The universal ghetto speedfeed mod.

pics: http://putfile.com/flightcancled/images/29037

Description. This mod puts a ghetto speed feed into the stock lid, allowing you to both have a spped feed and top off your hopper in the pit to have higher capacity on the break unlike the original halo/revvy ghetto speed feed mod I posted that has become so popular. It works on any hopper besides the evolution series(look in official egg mod thread for info on the egg speed feed).

Materials:
drill ar dremmel
1/8 inch bit
sandpaper or sanding bit
a little super glue or epoxy.
scissors
your stock lid.
One of these

Directions:
Take apart the hopper and remover the lid.
Using the drill perforate the edge of the lid on the inside of where it gets thicker and grips onto the shell. put the holes as close together as you can and go all the way around.
Now put the drill on high, put it in one of the holes and push against the plastic that is between that hole and the next until it pops through, connecting the holes.
Continue all the way around until the center circle falls out.
now with sandpaper or a sanding bit if you have one smooth out all the edges so that paint doesn't get cut up.
Take the snack trap and cut it like shown in the pics.
assemle as shown in pics and super glue in place.
reassemble the hopper


Enjoy.
if you have any questions please ask here instead of flooding my pm inbox I have enough repeated questions asked there that I would rather see them asked here.
flight cancled is offline   Reply With Quote
Old Sponsored Links Remove Advertisement
Advertisement
Old 10-02-2006, 03:39 PM #2
Diablo Wrath ESP (Banned)
 
Diablo Wrath ESP's Avatar
 
Join Date: Jan 2006
Location: Apple Valley, Minnesota
Nice. I don't really like the color of the lid though. Oh well.
Diablo Wrath ESP is offline   Reply With Quote
Old 10-02-2006, 03:59 PM #3
leed
Moderator
 
leed's Avatar
 
Join Date: Nov 2005
Location: Raleigh, NC
leed is a Moderator
Quote:
Originally Posted by Diablo Wrath ESP
Nice. I don't really like the color of the lid though. Oh well.
I'm sure you could dye them so they don't turn piss yellow.
__________________
This.
leed is offline   Reply With Quote
Old 10-02-2006, 04:23 PM #4
flight cancled
Engineering your BAN
 
flight cancled's Avatar
 
Join Date: Jan 2005
Location: RPI- Troy NY
flight cancled is a Supporting Member
funny story.... my mom found it in a parking lot way back when i first made the original speed feed thread. if you look at the distributer's website they are really clear. in fact the only reason that I was able to make this thread was that their website was molded on the thing

Last edited by flight cancled : 10-02-2006 at 04:26 PM.
flight cancled is offline   Reply With Quote
Old 10-04-2006, 02:57 PM #5
Ta-kun
suck off
 
Ta-kun's Avatar
 
Join Date: Apr 2006
Location: Philadelphia
Ima try and use sicors and cut one on my old shake and bake it might jsut work
__________________
the philadelphia straight edge
Ta-kun is offline   Reply With Quote
Old 10-04-2006, 06:03 PM #6
flight cancled
Engineering your BAN
 
flight cancled's Avatar
 
Join Date: Jan 2005
Location: RPI- Troy NY
flight cancled is a Supporting Member
go for it.

news flash

I have been informed that tennis ball container caps fit snugly onto revvis, so they should work on halos too.
flight cancled is offline   Reply With Quote
Old 10-04-2006, 07:52 PM #7
deviilinsiide (Banned)
 
Join Date: Dec 2005
Location: New Jersey
if you stick a rubberband around the outside of the lid on a halo/reloader b a pringles lid works perfecly once you cut it up.

Last edited by deviilinsiide : 03-08-2009 at 04:01 AM.
deviilinsiide is offline   Reply With Quote
Old 10-04-2006, 08:02 PM #8
flight cancled
Engineering your BAN
 
flight cancled's Avatar
 
Join Date: Jan 2005
Location: RPI- Troy NY
flight cancled is a Supporting Member
mmm. not really, I have messed with them and they are always prone to ripping off
flight cancled is offline   Reply With Quote
Old 10-05-2006, 06:04 PM #9
*Paintballer-King*
 
 
*Paintballer-King*'s Avatar
 
Join Date: Aug 2006


nothing can beat that works amazing
*Paintballer-King* is offline   Reply With Quote
Old 10-05-2006, 06:27 PM #10
flight cancled
Engineering your BAN
 
flight cancled's Avatar
 
Join Date: Jan 2005
Location: RPI- Troy NY
flight cancled is a Supporting Member
and that is?

if that is a pringles lid I am going to e-slap you lol. those work well for now, but the plastic is too brittle to work well. That and they don't fit. The stacks lids do, and I messed with those based off the ten round tube speed feeds with my boss, but we eventually gave up in them as they broke in play so often
flight cancled is offline   Reply With Quote
Old 10-05-2006, 10:32 PM #11
*Paintballer-King*
 
 
*Paintballer-King*'s Avatar
 
Join Date: Aug 2006
Quote:
Originally Posted by flight cancled
and that is?

if that is a pringles lid I am going to e-slap you lol. those work well for now, but the plastic is too brittle to work well. That and they don't fit. The stacks lids do, and I messed with those based off the ten round tube speed feeds with my boss, but we eventually gave up in them as they broke in play so often
nah man this works amazing ill post a vid when i make one, this is lays stackable is thsi is really strong and good, i'd rather use this than spend 20 buks for a speefeed any day
*Paintballer-King* is offline   Reply With Quote
Old 10-05-2006, 10:35 PM #12
*Paintballer-King*
 
 
*Paintballer-King*'s Avatar
 
Join Date: Aug 2006
k i made a vid--- but this is a second speedfeed i made as back up

http://media.putfile.com/gsf-002

Last edited by *Paintballer-King* : 10-05-2006 at 10:40 PM.
*Paintballer-King* is offline   Reply With Quote
Old 10-11-2006, 05:32 PM #13
leed
Moderator
 
leed's Avatar
 
Join Date: Nov 2005
Location: Raleigh, NC
leed is a Moderator
Quote:
Originally Posted by *Paintballer-King*
k i made a vid--- but this is a second speedfeed i made as back up

http://media.putfile.com/gsf-002
Wow. You used a Pringles can top for that?
__________________
This.
leed is offline   Reply With Quote
Old 10-11-2006, 07:10 PM #14
flight cancled
Engineering your BAN
 
flight cancled's Avatar
 
Join Date: Jan 2005
Location: RPI- Troy NY
flight cancled is a Supporting Member
all you need is to hit that on a table, or have something break a prong off in a gearbag or something and you are screwed.

as i have said before when I was working as a ref in 04 my boss figured out that a Lay's stackers lid fit onn perfectly an dcut out a rough speedfeed, after we messed with it for a bit we broek it, so we grabbed andother one, and another one..... After a few days of messing around with the idea eventually the whole lot wound up in the garbage. it simply doesn't worl, or the speedfeed would have hit the nation in 04, not 06.
flight cancled is offline   Reply With Quote
Old 10-12-2006, 05:43 PM #15
dm4syzygy
 
 
Join Date: Aug 2006
Location: hoboken
I just got my Halo tonight and I took the lid off a can of tennis balls .. it fits perfectly. I highly doubt this will come off during normal play. Now I just gotta figure out how to cut it neatly.
dm4syzygy is offline   Reply With Quote
Old 10-12-2006, 06:10 PM #16
Euouae
 
 
Euouae's Avatar
 
Join Date: Jun 2006
Euouae supports Cereal Killerz 2
Euouae donated to help Peyton Trent
Euouae supports Bob Gurnsey
Euouae supports our troops
I found out about that tennis ball can idea a few weeks ago, and I informed flightcancled. Problem I found with it was the durability. It breaks extremely easily after a few games. Not very practical IMO.
Euouae is offline   Reply With Quote
Old 10-12-2006, 08:39 PM #17
dm4syzygy
 
 
Join Date: Aug 2006
Location: hoboken
I just made two of these, one out of a Penn tennis ball can cap and one from a Wilson one. The Wilson cap is thicker so it's sturdier and should last longer but it's more difficult to load balls in than the Penn one.
dm4syzygy is offline   Reply With Quote
Old 10-12-2006, 08:43 PM #18
Euouae
 
 
Euouae's Avatar
 
Join Date: Jun 2006
Euouae supports Cereal Killerz 2
Euouae donated to help Peyton Trent
Euouae supports Bob Gurnsey
Euouae supports our troops
Those were my exact findings, except if you play ruff with them they might break, or at least the Penn one will. Although they are extremely cheap, and quick to make.
Euouae is offline   Reply With Quote
Old 10-12-2006, 09:30 PM #19
satanskaterx
unholy confessions
 
satanskaterx's Avatar
 
Join Date: Aug 2005
Location: Cali 805
satanskaterx owns a Planet Eclipse Ego
pringles

about 4 pringle canister lids should be enough for an eggy two triangular pieces frum each and the plastic is just right
__________________
USMC 0331
TRUST 18+ old 16+new =34+!!
satanskaterx is offline   Reply With Quote
Old 10-12-2006, 09:38 PM #20
Tacobueno
SPOOOOOOKYY FISH!!!
 
Tacobueno's Avatar
 
Join Date: Sep 2006
Annual Supporting Member
Tacobueno supports Empire
The Wilson tennis ball lids work great i made about 5 for my team as someone said before thjere a little thick but work great if cut properly adn the Penn are to small to fit and break real easy so i dont recomend them. Pringels lids are little to big stackables were a little too big and thats all ive tested right now. Wilson seam to work the best i got about 10 of them Lol we went dumpster diving at the tennis courts.
Tacobueno is offline   Reply With Quote
Old 10-12-2006, 09:55 PM #21
dm4syzygy
 
 
Join Date: Aug 2006
Location: hoboken
Quote:
Originally Posted by Tacobueno
The Wilson tennis ball lids work great i made about 5 for my team as someone said before thjere a little thick but work great if cut properly adn the Penn are to small to fit and break real easy so i dont recomend them. Pringels lids are little to big stackables were a little too big and thats all ive tested right now. Wilson seam to work the best i got about 10 of them Lol we went dumpster diving at the tennis courts.
Can u take a pic of how you cut it? Also which pods do you use?

I'm using dye locklids and I can't dump an entire pod into the hopper through a Wilson lid I made.
dm4syzygy is offline   Reply With Quote
Reply


Thread Tools

Posting Rules
Forum Jump