1. Remove the grips and disconnect the battery. Separate the frame from the body and disconnect the front microline fitting (1/8" allen wrench to remove the frame and fitting), gently set the body aside.
2. Use a metal punch, nail and hammer, or other tool to remove the trigger pin from the frame. This is the small circle located directly above the trigger in the frame. The trigger will then slide up and out from the frame.
3. Once the trigger is out, slide in the new trigger and reinstall the trigger pin. Some triggers require different instructions (such as the CP roller trigger, refer to their instructions if necessary). Adjust the trigger set screws to your preference.
4. Reconnect the microline fittings and reassemble the frame to the body. Reconnect the battery and reinstall the grips.
Let food be thy medicine and medicine be thy food