Hose on QEV too short?
I recently installed a QEV on my gun about 2 weeks ago, and I test fired it to get the dwell about right... It was working at about 15. Yesterday I take apart my gun to install my new trigger, and I go ahead and lube it up... When I was putting it back together I noticed that it looked like the hose to my QEV was a little long, so I cut it. It seemed to be the perfect length. I put it all back together and go to shoot it today, and it wont work unless my dwell is at almost 30...
I also unscrewed the silver part that the hose goes into off the brass part and put it on the other side so it would line up right when it was hand tight.
Forgot to mention that it will also fire one shot before it does the "puff" sound when my dwell is below 30.
Could either of these things i've listed be it, or am I on the completely wrong track... (Another part of the gun causing it... Etc)
All help is wanted
Last edited by Disarmer : 09-30-2006 at 05:45 PM.