So, some of you may be following my blog
. I've decided to post a thread too, more views and easier feedback.
The plan is to use as many of the parts I currently own (I've owned 5 Intimidators, I have plenty of spare parts...) to create one insane Intimidator.
The big parts I already have, I'll probably pick up some misc. parts as needed.
Here is a mock-up:
You may be wondering why I'm using an LED Clamshell. Well, the answer is simple. A QEV won't fit in new frames. And I already have one.
The QEV needs to be trimmed about 1/8" inch and the M3 to 10-32 adapter needs to be rounded off, but just from eye balling, it will fit. I have a decoration block that will be modified to cover the back of the tube.
Oh, the 2k4 Tadao board fits nicely. I had to trim the spring holder on the frame and one of the on/off posts, easy, I did it with a pair of pliers.
I'm already set to have the body milled, it's being done by www.eliapaintball.com
and it will be very, very, very aggressive. That is to say, she's going away a heifer
and coming back svelte
I'm not going to post the reference pictures of design I want, so you can all just squirm for now. That's where I am so far.
P.S. Words are defined for the incontinent