[ph0b]

Hi everyone,

Is there some kind of mechanism (that isn't in the diagrams) that forces the ball to stay in contact with the gas diffuser? From the diagrams, it looks like a snug fitting trap door would roll the ball forward as it was closing the breech.

Thanks!

[p8ntball72]

ice has a "TrapDoor" kit that lets you do a paint to bore match much like a paint to barrel match..
ill post pics if i can..


later..

[p8ntball72]

cant post on this server ..goto


http://www.clanknm.com/john/

[ph0b]

But what prevents the ball from rolling forward with the tip of trap door?

If you had a snug fitting paintball, the tip of the trapdoor would roll the paintball forward in the breech as it was closing...right?

That would cause a gap between the gas diffuser and the paintball... unless you had something that prevented the paintball from rolling forward.

[p8ntball72]

there are also 3 ball stops that hold the ball in place, ill see if i can get a good pic of the breach and put it on my fttp.

later

[ph0b]

Oh coolness dude, thanks!