I have just recieved my TIMMY and it a 1.4.3 and when I turn it on it says 14 /sec and when I shoot a couple shots it goes down to 12/sec. WHATS UP?? also How do you enter the setting you want. I hold the 2 buttons down let go and it goes to the menu then when I push the right one it goes in to mode and when I click the left one it goes turbo reactive ... ect ect how do you "enter that" so you can use turbo ECT. ect. ect..
Also what setting should I use for dwell and eye. Whats the difference.
The only way to get any settings to be permanent is to remove the grip and reset the dip switches to however you want them. If you just set something on the lcd screen then once you shut the gun off everything returns to its original settings. Its all very well explained in the manual.
Blue to Purple Intimidator
MacDev Gladiator Reg
68/4500 Pure Energy Preset HPA
Chrome Shochtech Dropforward
PettyPB Trigger Mod!
Clear Ridged Grips
12v Blue Revy w/ PettyPB BallWacker Mod and TurboRev by WickedAirSportz! www.hazardpaintball.net
If you are dryfiring without any balls, the eyes will start doing their job - when they don't see any balls, the marker will default back to 12 BPS and Semi.
Set the marker up with the dip switches and forget the LCD and buttons are there.
You will have less trouble if you do this.
If you have to tinker with the buttons and stuff, you will accidently turn the eyes off on a fairly regular basis and chop paint like a blender.
Granted the buttons and LCD are cool, but after initial setup, will cause you more grief than they are worth.
Remember the words of the infamous TV huckster: SET IT AND FORGET IT!!
Original Timmy Whisperer, Voider of Warrantys and Healer of Unicorns.
Petty Paintball - www.pettypb.com