Titanum Ram ? - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 12-15-2002, 11:14 AM #1
Lou28
 
 
Lou28's Avatar
 
Join Date: Sep 2002
Location: someplace else
 has been a member for 10 years
Titanum Ram ?

I have a GZ with the hight flow barbs and im looking in to getting a volumizer what i need to know is how the titanium ram will affect my marker and what i have to do to my marker to makeit work not just well but very well

thanks for the help
__________________
its not how you get there...
its where you end up!

My Feedback
My Ebay Feedback
Lou28 is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 12-15-2002, 09:17 PM #2
Lou28
 
 
Lou28's Avatar
 
Join Date: Sep 2002
Location: someplace else
 has been a member for 10 years
so what your saying is that it aint worth getting unless you have to have every upgrade that your timmy can have
__________________
its not how you get there...
its where you end up!

My Feedback
My Ebay Feedback
Lou28 is offline  
Old 12-15-2002, 10:35 PM #3
mbpaintball
beat up, keyed up
 
mbpaintball's Avatar
 
Join Date: Aug 2002
Location: winnipeg
 has been a member for 10 years
it's not a must

If you have an EQ board, and you're shooting alot of paint at high speeds, then supposedly the ti-ram will remove some of the extra recoil. If you are'nt, then don't bother with the ram, spend the $$$ on paint instead.

Last edited by mbpaintball : 12-15-2002 at 10:46 PM.
mbpaintball is offline  
Old 12-16-2002, 09:31 AM #4
speedballfreak
i wanna be james bond
 
speedballfreak's Avatar
 
Join Date: Sep 2002
Location: monroe, nc
speedballfreak is a Supporting Member
 has been a member for 10 years
ont get a titanium ram. you'll tear up the metal. its a waste of money.
speedballfreak is offline  
Old 12-16-2002, 10:28 AM #5
mxpimp18
Big Pimpen
 
mxpimp18's Avatar
 
Join Date: Apr 2001
Location: WA
 has been a member for 10 years
it will not tear up the metal.
mxpimp18 is offline  
Old 12-16-2002, 05:17 PM #6
Thorpydo
dede!
 
Thorpydo's Avatar
 
Join Date: Oct 2001
Location: San Diego, CA
Thorpydo is a founding member
 has been a member for 10 years
Seems to me like it wouldn't tear up the metal; The ram runs on the O-rings.

Also seems that it wouldn't reduce kick. Sure it's a little bit lighter, but if you put it in your marker your going to have to turn your LPR up a bit so that the valve is still hit with the same amount of force. If ween't planning on turning your LPR up, seems as though you could get the same effect by just using the stock stainless ram and turning the pressure down a bit.
Thorpydo is offline  
Old 12-16-2002, 10:52 PM #7
Lou28
 
 
Lou28's Avatar
 
Join Date: Sep 2002
Location: someplace else
 has been a member for 10 years
thorpydo
you sound like you know your stuff or maybe i just agree with what you said
so i think ill have to skip the tit-ram
thanks everybody for your advice
__________________
its not how you get there...
its where you end up!

My Feedback
My Ebay Feedback
Lou28 is offline  
 




Posting Rules
Forum Jump