problems - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 06-12-2006, 10:17 PM #1
Crayonbreaker
Crayonbreaker
 
Crayonbreaker's Avatar
 
Join Date: Apr 2006
problems

ok here is the deal i bought this gun almost brand new tryed to use it and its a no go. it has a cp reg on it also if that helps but heres the deal. i was runing a maxflo and it was puting 250 into the cp thats what the gauge after the cp said i tryed to shoot it and the crono said -180 becuase it wouldnt go any lower. so i played a round with it that low then without anything cronod again and it said 285 so i was like ok thats not right. turned the maxflo off and the gun shot for about 20 full shots after it was off. so i tryed a new tank a 5000 evil tank the gauge after the cp said 600 psi so i tryed to shoot the balls just rolled out so i adjusted the hp reg some or the nob on the fron "new at this" and it blew past like it was suposta and still the balls rolled out. now i took the cp reg apart and it looks brand new nothing wrong there. i also switched out the noids and still the same thing. also the bolt has no pressure on it to i can move it back and forth with the same ammount of pressure aird up or not. can any one tell me whats up?
Crayonbreaker is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 06-12-2006, 10:58 PM #2
dementedpaintballer (Banned)
Demented Products
 
dementedpaintballer's Avatar
 
Join Date: Dec 2005
Location: Lake Worth, FL
dementedpaintballer is a Supporting Member
What gun did you buy?
dementedpaintballer is offline  
Old 06-12-2006, 11:00 PM #3
pbguy3579
***407***
 
pbguy3579's Avatar
 
Join Date: Feb 2006
if your gauge said 600 that's good because the noid shuts odwn after 400 psi on the gauge, check to see if you valve is roatated or if the screw that holds the valve in is loose and readjust your regs hpr 250 and lpr until the gun leaks and back it out 1/4 turn, what gun do you have bko or b2k?
__________________
My Feedback

Parting Out B2K4, ASA's, and Other Parts!
<a

<a href="http://s192.photobucket.com/albums/z84/mwtbone/?action=view&current=pbgun-1.jpg" target="_blank"><img src="http://i192.photobucket.com/albums/z84/mwtbone/pbgun-1.jpg" border="0" alt="Photobucket"></a>
pbguy3579 is offline  
Old 06-12-2006, 11:22 PM #4
Crayonbreaker
Crayonbreaker
 
Crayonbreaker's Avatar
 
Join Date: Apr 2006
its a bko sorry but i tryed all that stuff besides the valve things i dont know how to do that i know were the screw is but not how to change any of that and heres the other catch the gauge says 600 but it wont blow past like it should?
Crayonbreaker is offline  
Old 06-12-2006, 11:36 PM #5
Madpooh
1-800-mad-pooh
 
Madpooh's Avatar
 
Join Date: Jul 2003
Location: Long Island, NY
Annual Supporting Member
Madpooh is a Supporting Member
 has been a member for 10 years
Madpooh plays in the USPL
Madpooh donated to help Peyton Trent
Madpooh supports our troops
set tank at 450psi, hpr to 250psi, and lpr for velocity
Madpooh is offline  
Old 06-12-2006, 11:48 PM #6
Crayonbreaker
Crayonbreaker
 
Crayonbreaker's Avatar
 
Join Date: Apr 2006
got ya but the lpr turned all the way in with the gauge after the cp saying 550 still the balls were just rolling out
Crayonbreaker is offline  
Old 06-13-2006, 12:12 AM #7
Crayonbreaker
Crayonbreaker
 
Crayonbreaker's Avatar
 
Join Date: Apr 2006
ok im going to try to discribe this but im not sure of all the part names ok i took the gun down part by part i took the cp reg off and it looked good air flow fine now i took the block off that has the gauge on it looks good air flows fine now i got to the holes under that block and when i try to blow through them no air will pass through. is this supposta be like that also does the part were the knob for the lpr or volicity adjuster screws in come off and how do i take the valve out of the gun could this be the problem?
Crayonbreaker is offline  
Old 06-13-2006, 11:03 PM #8
Crayonbreaker
Crayonbreaker
 
Crayonbreaker's Avatar
 
Join Date: Apr 2006
up can any one help me
Crayonbreaker is offline  
Old 06-13-2006, 11:32 PM #9
Eric the Great
not Flavor Flav
 
Eric the Great's Avatar
 
Join Date: Sep 2003
Location: USAs most Dangerous City
Eric the Great is a Supporting Member
 has been a member for 10 years
yes madpooh did.
listen to what he is saying, hes wiser than you.

if your hpr is up to high it makes the valve hard to open. the guage on the side of the maker reads your hpr pressure, it should never be above 300psi.

the cp HPR is adjusted by the little allen screw on the side of it, in is down and out is up.

the LPR is either on the bottom of the vert asa in the 02-03 models or on the front of the maker in the 04 model. in is up and out is down.
__________________
TOTAL GREIF
Eric the Great is offline  
Old 06-13-2006, 11:41 PM #10
Madpooh
1-800-mad-pooh
 
Madpooh's Avatar
 
Join Date: Jul 2003
Location: Long Island, NY
Annual Supporting Member
Madpooh is a Supporting Member
 has been a member for 10 years
Madpooh plays in the USPL
Madpooh donated to help Peyton Trent
Madpooh supports our troops
bolt upside down?
Madpooh is offline  
Old 06-14-2006, 10:02 AM #11
Crayonbreaker
Crayonbreaker
 
Crayonbreaker's Avatar
 
Join Date: Apr 2006
yes i understand all that

nope but how come it only blows by half the time?
Crayonbreaker is offline  
Old 06-14-2006, 12:03 PM #12
Eric the Great
not Flavor Flav
 
Eric the Great's Avatar
 
Join Date: Sep 2003
Location: USAs most Dangerous City
Eric the Great is a Supporting Member
 has been a member for 10 years
how come what blows by half the time? the bolt?

you mean ....how come the bolt only half cycles?
if thats the case, is the bolt only going half way forward when your pull the trigger or is it only going half way back after? does the bolt move freely back and forward w/o air on the marker?did you reset your regs like madpooh said?
__________________
TOTAL GREIF
Eric the Great is offline  
Old 06-14-2006, 11:08 PM #13
Crayonbreaker
Crayonbreaker
 
Crayonbreaker's Avatar
 
Join Date: Apr 2006
i open the gun up all the way the hpr and lpr cranked as high as they will go some times it blows past the noid and some times it doesnt and im running it at the same pressure every time.
Crayonbreaker is offline  
Old 06-15-2006, 01:16 AM #14
Eric the Great
not Flavor Flav
 
Eric the Great's Avatar
 
Join Date: Sep 2003
Location: USAs most Dangerous City
Eric the Great is a Supporting Member
 has been a member for 10 years
Quote:
Originally Posted by Crayonbreaker
i open the gun up all the way the hpr and lpr cranked as high as they will go ....
have you listened to anything in this thread? reset your regs. turn them both all the way off, then turn your hpr to 250, then lpr to speed. tell us what happens after that. it seems as though you need to read manual or somthing.

if your hpr is at 250 and your lpr is up enough to cycle the marker and the air is bleeding off at the noid then there is a problem. but if you crank both your regs up all the way, then thats what its susposed to do to prevent people like you from ruining their marker.
__________________
TOTAL GREIF
Eric the Great is offline  
Old 06-15-2006, 01:23 AM #15
dementedpaintballer (Banned)
Demented Products
 
dementedpaintballer's Avatar
 
Join Date: Dec 2005
Location: Lake Worth, FL
dementedpaintballer is a Supporting Member
Quote:
Originally Posted by Eric the Great
have you listened to anything in this thread? reset your regs. turn them both all the way off, then turn your hpr to 250, then lpr to speed. tell us what happens after that. it seems as though you need to read manual or somthing.

if your hpr is at 250 and your lpr is up enough to cycle the marker and the air is bleeding off at the noid then there is a problem. but if you crank both your regs up all the way, then thats what its susposed to do to prevent people like you from ruining their marker.
Do as he says. Reset your regs or just live with the fact that you will never ge your gun to work right because of your ignorance with it.
dementedpaintballer is offline  
Old 06-15-2006, 12:11 PM #16
Crayonbreaker
Crayonbreaker
 
Crayonbreaker's Avatar
 
Join Date: Apr 2006
wow talk about ignorance none of you read what i am saying at all... the noid is designed to blow past when the lpr or hpr is turned up to high so that you do not wreck it. and what i was saying to you fine and well tought people is that it does this only half the time.. like i said b4 and then you chimed in and told me something i already know this does me no good.. also what i was saying is when the gun is aired properly the bolt/ram has no resistance which it should have... humm why dont you all try reading what i write rather then give me the same information over and over again.. they need to make this guy hiting dumb ***** instead of a computer
Crayonbreaker is offline  
Old 06-15-2006, 01:21 PM #17
pbguy3579
***407***
 
pbguy3579's Avatar
 
Join Date: Feb 2006
now no ones going to help you because you are acting like a dumb****
__________________
My Feedback

Parting Out B2K4, ASA's, and Other Parts!
<a

<a href="http://s192.photobucket.com/albums/z84/mwtbone/?action=view&current=pbgun-1.jpg" target="_blank"><img src="http://i192.photobucket.com/albums/z84/mwtbone/pbgun-1.jpg" border="0" alt="Photobucket"></a>
pbguy3579 is offline  
Old 06-15-2006, 05:07 PM #18
Crayonbreaker
Crayonbreaker
 
Crayonbreaker's Avatar
 
Join Date: Apr 2006
guess i better go to a place were people can read. and know what there talking about all the info i was given here a 2 year old could have told me your a bunch of ****ing retards learn how to read what people post and you might be of some help.
Crayonbreaker is offline  
Old 06-15-2006, 05:09 PM #19
Crayonbreaker
Crayonbreaker
 
Crayonbreaker's Avatar
 
Join Date: Apr 2006
pbguy demented help on that one geting me started... as he says
"Do as he says. Reset your regs or just live with the fact that you will never ge your gun to work right because of your ignorance with it."
Crayonbreaker is offline  
Old 06-15-2006, 07:14 PM #20
dementedpaintballer (Banned)
Demented Products
 
dementedpaintballer's Avatar
 
Join Date: Dec 2005
Location: Lake Worth, FL
dementedpaintballer is a Supporting Member
You stated that you are running with the same pressures. Your problem is because you fail to turn your regs down.

I will say nothing more because frankly, you do not deserve to be helped in my opinion.
dementedpaintballer is offline  
Old 06-15-2006, 11:18 PM #21
Crayonbreaker
Crayonbreaker
 
Crayonbreaker's Avatar
 
Join Date: Apr 2006
demented if you read into my post more you would have seen that i stated that i was running the SAME pressures yes you got that right but you missed the rest of what i was saying. the rest of what i was saying was that it only blows past the noid half the time like it is made to do the other half of the time it just charges the noid and blows the top on that. what i was also saying is that yes i know how to adjust my regs i turn my hpr CP reg to 250 300 becuase that is were this marker operates but with the lpr turned all the way in as far as it goes the balls still roll out.
Crayonbreaker is offline  
 




Posting Rules
Forum Jump