|
Archived Thread - Cannot Edit
|
05-22-2006, 01:01 PM
|
#1
|
|
THE MORMONATOR
Join Date: Dec 2005
Location: Virginia
|
Electronics Problem!!!
ok, so i bought this shocker from a dude here on pbn, from this heffe guy. he tells me that it had an he bolt in it but i dont think so, it looks like the stock sleeve and bolt, but he tells me its the smartparts old he and the evolve sleeve and the evolve big black thing. the bolt doesnt have slots instead of holes and there isnt that oring up close to the front so it cant be the sp he. ill post pics so somebody can tell me what it is.
other than that i think i have an upper board problem. the eyes dont work, and the on/off button doesnt work everynow and then, where can i get just the upper board?
__________________
RIP - Rick Potter, you were a good friend, employer, and a good man
aim - mormonator1119
email - p8ntbllmormnatr@msn.com
Mormon Baller and proud of it! If you are a mormon baller to then copy this into your sig.
|
|
|
|
05-22-2006, 01:13 PM
|
#2
|
|
The Shocker
|
Post pics of the bolt and I or someone else can tell you. Also check your upper board for screw damage. Zdspb.com has all of your shocker needs, and its a great site. Id check that site out and pretty much all of your shocker questions will be answered. If you need any further help you can get me on aim kunzy420
__________________
Ohio Aggression
|
|
|
|
|
05-22-2006, 01:27 PM
|
#3
|
|
THE MORMONATOR
Join Date: Dec 2005
Location: Virginia
|
the upper board doesnt show signs of damage, but sometimes the button wont do anything, i can feel it click and i have to hold it down, and it changes from vision to non really fast, one time it didnt even power up for a whole day, and the vision is acting like its not registering paint. i get that stupid noise. he said he replaced the wiring harness and eye, and i cleaned it just to be sure, but everything stayed the same. this is all with a new battery of course.
__________________
RIP - Rick Potter, you were a good friend, employer, and a good man
aim - mormonator1119
email - p8ntbllmormnatr@msn.com
Mormon Baller and proud of it! If you are a mormon baller to then copy this into your sig.
|
|
|
|
|
05-22-2006, 01:34 PM
|
#4
|
|
THE MORMONATOR
Join Date: Dec 2005
Location: Virginia
|
here are pics of the bolt set up thats in the shocker
__________________
RIP - Rick Potter, you were a good friend, employer, and a good man
aim - mormonator1119
email - p8ntbllmormnatr@msn.com
Mormon Baller and proud of it! If you are a mormon baller to then copy this into your sig.
|
|
|
|
|
05-22-2006, 01:38 PM
|
#5
|
|
THE MORMONATOR
Join Date: Dec 2005
Location: Virginia
|
if those dont work go to putfile.com/images/mormonator44
__________________
RIP - Rick Potter, you were a good friend, employer, and a good man
aim - mormonator1119
email - p8ntbllmormnatr@msn.com
Mormon Baller and proud of it! If you are a mormon baller to then copy this into your sig.
|
|
|
|
|
05-22-2006, 02:31 PM
|
#6
|
|
The Shocker
|
Pics wont work even with that link. Check the connectors on the board..Where the wiring harness plugs in. I think its like the ninth pin thats for vision. If thats bent then you will have vision problems. All of this is on zdspb.com so check that out.
__________________
Ohio Aggression
|
|
|
|
|
05-22-2006, 02:56 PM
|
#7
|
|
THE MORMONATOR
Join Date: Dec 2005
Location: Virginia
|
__________________
RIP - Rick Potter, you were a good friend, employer, and a good man
aim - mormonator1119
email - p8ntbllmormnatr@msn.com
Mormon Baller and proud of it! If you are a mormon baller to then copy this into your sig.
|
|
|
|
|
05-22-2006, 03:30 PM
|
#8
|
|
The Shocker
|
Yea thats the stock bolt.
__________________
Ohio Aggression
|
|
|
|
|
05-22-2006, 05:08 PM
|
#9
|
|
THE MORMONATOR
Join Date: Dec 2005
Location: Virginia
|
yea i figured, well spread the word, heffe`s a little ******
__________________
RIP - Rick Potter, you were a good friend, employer, and a good man
aim - mormonator1119
email - p8ntbllmormnatr@msn.com
Mormon Baller and proud of it! If you are a mormon baller to then copy this into your sig.
|
|
|
|
|
05-22-2006, 09:59 PM
|
#10
|
|
timetraveler
Join Date: Oct 2003
Location: Tecumseh MI
|
Usually the power button working intermittantly is resultant of it being damaged or worn out. The microswitches can exhibit the same "bouncing" problem as trigger switches, I've seen it a few times before.
__________________
ydna@zdspb.com - [ZDSPB.com]
nummech.com
As told by Stobaeus
...someone who had begun to learn geometry with Euclid, when he had learnt the first theorem, asked Euclid "What shall I get by learning these things?" Euclid called his slave and said "Give him threepence since he must make gain out of what he learns".
Used parts f/s
|
|
|
|
|
05-23-2006, 10:57 AM
|
#11
|
|
THE MORMONATOR
Join Date: Dec 2005
Location: Virginia
|
so i guess its just a matter of replacing the upper board?
__________________
RIP - Rick Potter, you were a good friend, employer, and a good man
aim - mormonator1119
email - p8ntbllmormnatr@msn.com
Mormon Baller and proud of it! If you are a mormon baller to then copy this into your sig.
|
|
|
|
|
05-23-2006, 09:03 PM
|
#12
|
|
vGisgo
Join Date: Apr 2006
Location: Livonia, MI
|
To test the power switch take the grip frame off the body then while the two are apart plug the harness back in. Then use your thumb to gently push the on off switch in. If it still works intermittantly then its what YDNA said. If it works fine using your thumb then it is miss aligned or too far from the button in the frame. You can try placing white out on the face of the on/off switch to bridge the gap.
__________________
Assumption is the mother of all **** ups.
"Thats a lot of Romans over there." "Yes but not one of them is Gisgo." Hannibal Barca and general Gisgo before the battle of Cannae in 216 BC.
"The league is a joke. I hate the "parity and the endless season. I hate these crappy franchises in Phoenix and Florida that dilute the talent pool. Too many teams make the playoffs and teams that use skill to produce stellar regular season records are forced to play mediocre teams who benefit from the looser playoff officiating. But most of all, I hate Gary Bettman who is the worst commissioner in any league.....ever". - bigolechet.
|
|
|
|
|
05-24-2006, 04:26 PM
|
#13
|
|
THE MORMONATOR
Join Date: Dec 2005
Location: Virginia
|
yhanks, all this is great but this still doesnt solve my vision problem
__________________
RIP - Rick Potter, you were a good friend, employer, and a good man
aim - mormonator1119
email - p8ntbllmormnatr@msn.com
Mormon Baller and proud of it! If you are a mormon baller to then copy this into your sig.
|
|
|
|
|
05-24-2006, 10:48 PM
|
#14
|
|
The Shocker
|
Did you check the pins inside the connector? Is the eye plugged in the right way?
__________________
Ohio Aggression
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
