CP leaking - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 05-14-2006, 02:56 AM #1
Lite_em_up
wHaT eVeRs ClEvEr
 
Lite_em_up's Avatar
 
Join Date: Apr 2006
CP leaking

my CP reg is leaking on my schocker , i put micro in the hole at the bottom and put the other end in the asa and air up and it hisses at the bottom of the reg were i plugged the micro line, yes i tried many different micro lines and they all leak i then tried with a longpiece and it didt leak as much but it was about 12 inches long and im not playing with a foot long micro line so i dont know if u guys know what to do but i need to fix it
Lite_em_up is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 05-14-2006, 02:57 AM #2
Lite_em_up
wHaT eVeRs ClEvEr
 
Lite_em_up's Avatar
 
Join Date: Apr 2006
up
Lite_em_up is offline  
Old 05-14-2006, 12:01 PM #3
gremlin75
.....I got nothing!
 
gremlin75's Avatar
 
Join Date: Aug 2002
Location: Taylor, MI
gremlin75 is a Moderator
gremlin75 is a Supporting Member
 has been a member for 10 years
gremlin75 is reppin' sidebar 4 life
gremlin75 is one of the top 500 posters on PbNation
gremlin75 is Legendary
Quote:
Originally Posted by Lite_em_up
up
OK first off why did you "UP" your thread. This isnt a b/s/t forum and only a minute had gone by

Now it sounds more like the fitting is leaking. Macrofittings can get warn out and go bad after quite a bit of use. First make sure the fitting is sealing where it screws into the reg. Then make sure you are pushing the macrom line all the way into the fitting (if you dont it will leak) If neaither of those help then it looks like you may need a new fitting..

later
gremlin
gremlin75 is offline  
 




Posting Rules
Forum Jump