Ok my stock b2k bolt is scratchin the paint off inside the gun. not completely but its very visible right in front of the detents. plus the bolt itself has scrathes on it and in those scratches its black. the gun's paint has stopped coming off and being scratched btu anytime i fire the bolt's scrathes get that black crap on them. it may have just been sand from last week but im not sure. can anyone help me out?
"Originally posted by Jester of Paint: Who needs an Ion when you have a Bushmaster"
ICD FOR LIFE
If you believe in God, and are proud of it, put this in your sig.
its nothing to worry about...it happens to almost everyones stock bolt...
"We call this a Brokeback Mountain game, because there's so much penetration and kickouts," Jackson said. "It was one of those games." - I quote the one and only Phil Jackson.
I follow Metal Jesus
umm, my Shocktech bolt was stickin, so i sanded it with steel wool, and I dont ;think it stick now. try sanding it with very fine grit sandpaper or steel wool. it'll keep the rubbing down.be careful not to take off too much, or u'll get blowback or bad efficiency (maybe), so be careful, jsut experiment and sand or whatever until u get it right
I had that problem before but I did two things to solve the problem. The bolt pin sometimes slams against the frame, causing it the metal to bend downward and start shaving the bolt. First, file down that section of the frame that is shaving the bolt. Second, do a ram bumper mod to prevent the problem from happening again.
You gas up the marker, put on the gloves, strap on the mask, and walk onto the field... it doesn't matter that you failed a test, that your girlfriend broke up with you last nite, or that you got a ticket on the way there... your world is right for the next couple hours, this is your heaven on earth... live it... love it...this is the way and the reason i play