[Nasty1]

I have a PGP2 Stroker, and the ball detent, really don't do it's job.
is there anything I can use, from either another gun or make to put on this thing so I can start using this gun,
It double feeds tripple feeds, and if It don't do that it chopps.
I was thinking of using ION detents, or maybe brazing on a nut with threads on it to screw in a standard ball detent.
I have used about 10 different kinds of paint, gap worked the best for me but the stock detent may be positioned wrong, worn out?
my dream gun is a paper weight.

[vellnueve]

No wedgits?

[Nasty1]

there is a white ball on a wire, that don't do anything, and there are 2 dents at the end of the fire chamber, assuming this will hold the ball before it gets fired, the balls just roll out,
do i need to use large boar balls, bigger than .689..

[biteme]

Are you sure that paint is .689? Run some through a paint sizer to make sure.

[Nasty1]

I just put an extra tweek, bend on that wire with the ball on it, It helped out alot, I also had to adjust the feed cap, that was way outa wack. I can actually can shoot the gun now.
I played 3 games with it today and I only had 1 chop, due to It was the last ball loading from the spring feed, my fault.
1 chop outa 100 rounds, much better than 1 chop outa every 2 balls.
I still would like something a little better for a detent.
NICE, first good time I had with the gun that I had done up a year ago.

1 sucessful flag pull and HANG, due to this gun, that is why I had this gun custumed.

[xstatexterrorx]

w00t