[wonderflee]

Who here knows how to remove the rock valve body caps either end. The rock is leaking air through the air release hole and I think that need to change some O-rings on the plunger. I can remove the adjusting screws but cannot figure out how to remove the Rock cap. I emailed palmer's shop but no return email. thanks

By the way the end caps on both sides are smooth so I can't spin it with a nickel or even a screwdriver.

[dan_kasper]

on what kind of gun, or like a cocker rock.

if cocker, the body unscrews off the end cap.

[wonderflee]

Sorry, its an earlier blazer.

[CraigPalmer]

Originally Posted by wonderflee

Sorry, its an earlier blazer.

Screw a 3/8-24 bolt with a nut into the cap. Tighten down the nut onto the cap. That will hold the cap tight with the bolt. Then unscrew the bolt, nut and cap out at the same time.

Its a little tricky at first.. but once you get the hang of it, they come right out.

[wonderflee]

AAAHHHH, makes sense, Thanks!!!!!