Remove Lense From Profilers?

pinball-1 · 03-09-2006, 08:36 PM

I cant figure out how to remove the lense from my profilers. When I bought them they had on a mirror lense but its to dark for me, so I want to change back to the clear ones. I dont exactly know how to do it and I dont want to break anything on them. I checked the manual and it dosnt really help as it shows a pic of a different mask. I know it might be posted somewhere how to do it, but I cant use the search feature as there are to many people on.
Thanks for any and all help.
Dustin

BrettB (Banned) · 03-09-2006, 09:08 PM

You gotta be kiddin me right?

Stickies are your friend

pinball-1 · 03-09-2006, 09:48 PM

What sticky is it in? I seen the Invision one, but none for profilers. I really dont have the time to read hundreds of pages to find the info, if you could give me a link I would appreciate it.
Thanks,
Dustin

Willowhawk · 03-09-2006, 11:27 PM

amazing..

posts like this baffle me all the time.

i had to remove one two weeks ago for the first time, and the funny thing was two people tried to do the same thing before me, they failed... i laughed.

BoostCrzy · 03-10-2006, 09:15 AM

Lift the tab and pull back on the clip at the same time.....repeat on other side...then press in the lens tab and push forward...be sure the tabs on the top of the lens fill the recesses in the frame when re-installing.

pinball-1 · 03-10-2006, 05:00 PM

Quote:

Originally Posted by BoostCrzy

Lift the tab and pull back on the clip at the same time.....repeat on other side...then press in the lens tab and push forward...be sure the tabs on the top of the lens fill the recesses in the frame when re-installing.

Thanks for the help, I figured it out. It looks a lot better with the clear lense on.

JDmutt · 03-10-2006, 05:53 PM

there's a tard on every corner.