Osiris solenoid problem - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 03-28-2006, 06:31 PM #1
WGP WORRACLE
///M5 Ultimate Sedan
 
WGP WORRACLE's Avatar
 
Join Date: Feb 2005
Location: Olmsted Falls, OH
Osiris solenoid problem

ok the problem i'm having is that the solenoid on my osiris that controls the hammer leaks and keeps the hammer in the extened position whenever there is air through it.
I have tried putting the hose from the lpr in all of the 3 holes, same with the hose to the hammer.
any suggestions?
also if anyone would take apart their Osiris markers and tell me what the information on the side of the solenoid says and which holes the hoses are hooked into from the factory. thanks (pictures help )
__________________
My Feedback
"Wiping is like masturbation. Don't tell me you don't do it, and it's embarrasing as hell when you get caught"
-Heavy D
New gay feedback
WGP WORRACLE is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 04-02-2006, 10:26 AM #2
WGP WORRACLE
///M5 Ultimate Sedan
 
WGP WORRACLE's Avatar
 
Join Date: Feb 2005
Location: Olmsted Falls, OH
please? anybody?
__________________
My Feedback
"Wiping is like masturbation. Don't tell me you don't do it, and it's embarrasing as hell when you get caught"
-Heavy D
New gay feedback
WGP WORRACLE is offline  
Old 05-23-2006, 09:30 PM #3
WGP WORRACLE
///M5 Ultimate Sedan
 
WGP WORRACLE's Avatar
 
Join Date: Feb 2005
Location: Olmsted Falls, OH
Please, come on guys, I really need some help here. I need to know which hole the input hose plugs into and which hole the output to the ram plugs into. Also if you could the orientation of the spool. Again pictures help.
Thanks
__________________
My Feedback
"Wiping is like masturbation. Don't tell me you don't do it, and it's embarrasing as hell when you get caught"
-Heavy D
New gay feedback
WGP WORRACLE is offline  
Old 05-24-2006, 07:18 AM #4
Polish Guy
WarMachine Guru
 
Polish Guy's Avatar
 
Join Date: Oct 2002
Location: Greenville, SC
 has been a member for 10 years
I think you're on your own in most respects - I haven't touched, much less, worked on an Osiris in over a year.

One suggestion I can pose is to go post this in the Misc. Markers forum and the Cocker forum.
__________________
Dark Carnival

The Original WarMachine Factory Team
SN's a nationality - not a shoe shine...

FeedbacK
Polish Guy is offline  
Old 05-24-2006, 05:33 PM #5
WGP WORRACLE
///M5 Ultimate Sedan
 
WGP WORRACLE's Avatar
 
Join Date: Feb 2005
Location: Olmsted Falls, OH
yep, I kinda figured that. Just hoping that someone out there still had an osiris laying around that they were willing to take apart for me. oh well.
Oh before I forget, do you know where I can buy a new solenoid? whenever I search the net the only solenoids I ever find are the magnetic ones that are used on regular e-cockers that release the hammer.
Thanks.
__________________
My Feedback
"Wiping is like masturbation. Don't tell me you don't do it, and it's embarrasing as hell when you get caught"
-Heavy D
New gay feedback
WGP WORRACLE is offline  
Old 05-24-2006, 08:53 PM #6
Polish Guy
WarMachine Guru
 
Polish Guy's Avatar
 
Join Date: Oct 2002
Location: Greenville, SC
 has been a member for 10 years
My best suggestion is to find Leon_styles on the forums here, but I'm not sure if he's still around or not. He could probably point you in a much clearer direction.
__________________
Dark Carnival

The Original WarMachine Factory Team
SN's a nationality - not a shoe shine...

FeedbacK
Polish Guy is offline  
Old 05-24-2006, 09:05 PM #7
fiero32v
 
 
fiero32v's Avatar
 
Join Date: Oct 2004
Location: fresno ca
 has been a member for 10 years
if its like a dragun "the one" or an old spyder em1 where it uses a lp air to push a hammer to open the hp valve this might work http://www.airsoldier.com:8080/cgi-b...Code=SOLENOIDS . if not they should have what you need
__________________
marker pics http://photobucket.com/albums/b181/fireo32v/
here, hold MY trophy while I kiss YOUR girlfreind!!!
fiero32v is offline  
Old 05-31-2006, 08:19 PM #8
WGP WORRACLE
///M5 Ultimate Sedan
 
WGP WORRACLE's Avatar
 
Join Date: Feb 2005
Location: Olmsted Falls, OH
^^^^^^^^
Sir, I think I love you.........
That was exactly what I was looking for. I even found a diagram of my solenoid that I currently have. So thanks and kudos to you
__________________
My Feedback
"Wiping is like masturbation. Don't tell me you don't do it, and it's embarrasing as hell when you get caught"
-Heavy D
New gay feedback
WGP WORRACLE is offline  
Old 06-02-2006, 03:18 PM #9
majinebz
 
 
majinebz's Avatar
 
Join Date: Jan 2004
Location: USA
 has been a member for 10 years
angel is wrong. The osiris is a spring operated return ram. You need the first one. The one simular to the one kit noids 4 the spider/dragun. My ram noid on my osiris went bad also. It ended up beign a real real small oring that broke inside?? (dont ask me how, it was like the size of a pencil tip??) PGI fixed it for free but that was like 2 years ago or longer.
__________________
04 DC Racegun Excal
Warp feed ICE Epic
GenE TRIX
majinebz is offline  
Old 06-09-2006, 03:07 AM #10
WGP WORRACLE
///M5 Ultimate Sedan
 
WGP WORRACLE's Avatar
 
Join Date: Feb 2005
Location: Olmsted Falls, OH
hrmmmmm I know that that is the right solenoid because the TES "THE ONE is a spring returned ram as well.
but I will have to go over my solenoid o-rings again, that might be the problem. never thought of that. Thanks for the tip.
__________________
My Feedback
"Wiping is like masturbation. Don't tell me you don't do it, and it's embarrasing as hell when you get caught"
-Heavy D
New gay feedback

Last edited by WGP WORRACLE : 06-11-2006 at 09:03 PM.
WGP WORRACLE is offline  
 




Posting Rules
Forum Jump