Pimp Micro Switch - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 02-19-2006, 12:11 AM #1
potter33
PM6 RULES!!!!!!!!!!!!!!!!
 
potter33's Avatar
 
Join Date: Aug 2005
Pimp Micro Switch

Hey guys my micro switch is really hard to turn on/off how do i fix it.
__________________
My Feedback
GearBag Sale
potter33 is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 02-19-2006, 12:26 AM #2
BeenPimpSlapped?
Obi-Wan-PIMP-Nobi
 
BeenPimpSlapped?'s Avatar
 
Join Date: Feb 2004
Location: Team EVIL_SACRIFICE
BeenPimpSlapped? is a Supporting Member
 has been a member for 10 years
Do you mean the switch to turn on the board? Or the trigger switch?

For the board, take off grip and clam shell grip frame cover. Loosen screw holding board in place. Retighten leaving it just loose enough to wiggle the board a little. Place cover back on. Rerplace grips and it should not be as tight. If the board is tightened at an angle it can bind with the switch making it hard to move.

If it,s the trigger switch you have something binding. Most likely the switch lever is stuck on the front adjustment screw inside the grip. Remove the switch and replace being very careful the lever is free to be hit by the back adjustment screw.
__________________
March '04 and '05 EVIL PIMP o'da Month - PIMP SLAP 101
OMEN so SEXY your MOM did it..!!
BPS Paintball-Buying cheap used or broken markers. PM me.
BeenPimpSlapped? Official Fan Club Member #1
Kinda scary that "The.Evil.Tech", the "smart" guy at EVIL can't figure out the double post thing..gotta stop using that ramping mouse..
Offical Jenna Jameson Fan Club Member #1
I'm the forgotten EVIL BETA tester..and PIMP-FU MASTER
BeenPimpSlapped? is offline  
Old 02-19-2006, 09:22 AM #3
potter33
PM6 RULES!!!!!!!!!!!!!!!!
 
potter33's Avatar
 
Join Date: Aug 2005
Thanks ^^^^^
__________________
My Feedback
GearBag Sale
potter33 is offline  
Old 02-19-2006, 11:32 AM #4
racerc20
 
 
racerc20's Avatar
 
Join Date: Feb 2005
Location: NYC
racerc20 is a Supporting Member
another thing i noticed is the left half of the grip frame(where the hole is for the switch to stick through) it could possibly need to be opened up slightly to give yourself a little more room... had to do that with my blue pimp when i got it... also try repositionng the pcb like bps said that might help alleviate the stiffness.
Racer
__________________
Team: BBB Brittle Boned Ballers
08 Independence, Black, with evil pipe kit.
06' Alien Interceptor Red/Black Kaner Barrel Kit, 06' Alien Interceptor Green/Black Evil Pipe kit and Evil Det Reg
PIMP BLACK EFT JD SE PIMP...prototype.
www.ALIENpb.com
www.HighVelocityPaintball.com

www.BossPaintballProducts.com
racerc20 is offline  
 




Posting Rules
Forum Jump