need specific pics - drafting quest in CAD

DeadBoxBoy13 · #1 02-07-2006, 12:17 AM

Hey,

For my 3rd quarter project in drafting I opted to make a quest in 3d. Im done with the trigger frame and trigger, but I need the following:
-pic directly over gun
-pic directly behind gun
-pic directly infront of gun
-pic of side of body straight on
-pic of triggerframe w/ grips off (expose board & battery)
-*if possible, pic of underside of body w/o gripframe

if anyone can help me id really appreciate it! Ill post pictures of it as i work, and you can give me suggestions (im pretty new to autoCAD so dont expect it to be perfect!

Thanks

bronc.v2 (Banned) · #2 02-07-2006, 02:36 PM

I'm going take some pics tonight when I get home. I'll snap a few of these for a fellow NorCal baller and post em up.

DeadBoxBoy13 · #3 02-08-2006, 12:20 AM

thanks alot

bronc.v2 (Banned) · #4 02-08-2006, 03:44 PM

Sorry, my girl ran off with my car last night with my marker in the trunk when she went to her Moms. I'll get it back tonight and I'll get those pics. Doh!

Wolfhawk460 (Banned) · #5 02-08-2006, 04:00 PM

if you don't have them by tuesday or wednesday I'll get them for you man, that's when my blue one sohuld be in! good luck!

aceofspades05 · #6 02-08-2006, 04:14 PM

Quote:

Originally Posted by bronc.v2

Sorry, my girl ran off with my car last night with my marker in the trunk when she went to her Moms. I'll get it back tonight and I'll get those pics. Doh!

ouch, that sucks

see if any of the pics in my sig help, if not sorry but it was worth the shot, thats cool man i'd like to see it when your done

DeadBoxBoy13 · #7 02-08-2006, 09:06 PM

yeah i already checked the pic thread, but nothing really helped. like in some pics i can partially see alot of what i need, but if they are of the full thing, its really hard to "trace" on CAD...what i do for "scale" is to put a picture in the background on the program so i can trace the outlines for more accuracy. pictures that cut off what im trying to make means lots of piecing together, which is very very time consuming and somewhat frustrating in cad. thanks for all the support so far though!

DeadBoxBoy13 · #8 02-09-2006, 09:48 PM

no pics yet? =[

papaintballer15 · #9 02-09-2006, 09:55 PM

have aim? if so add me at papaintballer14
ill give ya pics

DeadBoxBoy13 · #10 02-09-2006, 11:17 PM

well i need someone else to gimme pics
bcuz papantballer15 didnt know how to send pics via AIM

papaintballer15 · #11 02-10-2006, 07:08 AM

oh i can, bc i send them all the time. Just yours sucks.

DeadBoxBoy13 · #12 02-12-2006, 02:21 AM

papaintballer15 - my AIM is some wierd version. im trying to get a diff. one

DeadBoxBoy13 · #13 02-12-2006, 01:07 PM

does anyone have any pictures they can post yet!? geeze lol =[

shutter_elite · #14 02-12-2006, 01:18 PM

one moment, ill take em & upload them then pm them to you

shutter_elite · #15 02-12-2006, 01:32 PM

pics sent

DeadBoxBoy13 · #16 02-12-2006, 01:43 PM

Thanks. I think I can work with that. If anyone else has any other pictures id appreciate it, just so i can try to find the best reference pictures possible to make an accurate final result.

DeadBoxBoy13 · #17 02-17-2006, 10:03 PM

i still neeed pics!

T1rippaman · #18 02-21-2006, 10:28 AM

They arent making you do the gun in 3D autocad, are they? Cause that is torture! I use Autodesk Inventor at work......100x better than 3D CAD.

trooper46 · #19 02-21-2006, 11:23 AM

^^true that^^
inventor and solid works FTW. any thing else just takes way too much time.

T1rippaman · #20 02-21-2006, 11:31 AM

absolutely. I took Solidworks in college, pretty fun. I made a working transmission......animations are pretty cool in solidworks.

bronc.v2 (Banned) · #21 02-21-2006, 12:17 PM

Sorry, I've been out of the state and just got back home yesterday. I'll take some high res shots tonight when I get home for you and post them up. Look for them tonight!

PS. do you need them with or without an on/off ASA on the gun and with or without the barrel on?