[eVilPIMPin Whiteboy]

what should my lpr and my dwell be on my pimp?
Any suggestions?

[pur3evil]

I run 12.5ms dwell and 120psi LPR on my Gold Pimp. HPR is at 150psi, and I'm shooting around 290fps.

On my Olive Pimp, I'm running 14ms dwell and 130psi LPR for break in. I'll lower that down once it's broken in.

-Howard

[spaceman2141]

please look a little harder next time. there is a thread that says pimp settings right on this page.

run your dwell anywhere from 11-13 and your lpr 120-135. it all depends on how long you have had it. if it is new, keep it at the higher settings for a lil while. then lower both gradually. like every 3-4 cases. then you could possible run it at 11/115

[masspb]

Originally Posted by spaceman2141

please look a little harder next time. there is a thread that says pimp settings right on this page.

run your dwell anywhere from 11-13 and your lpr 120-135. it all depends on how long you have had it. if it is new, keep it at the higher settings for a lil while. then lower both gradually. like every 3-4 cases. then you could possible run it at 11/115

dont be so harsh spaceman, i upped that thread after he posted this

[spaceman2141]

i wasnt trying to be harsh. thats why i used please, and still answered his question. i didnt know that it was upped afterwards. thats why we need a sticky.

[masspb]

sry

that thread should be stickied, if i was a mod it would have been there by now. and maybe changed a lil bit so it more organized