1/2" shorter in height and 4 oz. lighter in weight
2 piece Proto barrel (.690 bore)
New and improved LPR
New faster solenoid
LP bolt guide
Metal logo inserts
Locking no rise feedneck
ASA/Proto on/off bottomline
Integrated slide rail
-----
DM5 is 1/2 in. shorter than and 2 ounces lighter than the DM4, the DM6 is 1/2 in. short and 7 ounces lighter than the DM5
PM5 is 2 ounces lighter than the DM5 and 4 ounces lighter than the DM4.
PM6 shaved off .5 inches off the height and 4 ounces off the weight of its predecessor (PM5).
The Proto Matrices do not have removable chips, only removable boards. You can also get the boards flashed.
All guns use the Fuse Bolt design. The DM4 bolt is longer than the others, proving inefficient, the short bolt will get well get an extra 200 shots. The Pm5 gets more air because it runs at higher pressure, which also means more kick.
The DM4 & DM5 use an inline pressure of 180 psi and the DM6 runs at 165 psi. The PM5 runs at 220 psi and the PM6 runs at 165-170 psi.
The DM4 & DM5 use the same electronics, the DM5 is stock programmed faster, the PM5 and PM6 is completely different, and the DM6 comes stock with the UL Grip Frame, which comes with its own electronics.
The DM5 and the DMC are basically the same, except the DMC has stock Tournament Settings and 2 ounces lighter with the composite frame.
The DM6 and PM6 has an improved Solenoid which has improved efficiency with battery life, bolt life, and a longer lasting solenoid. The Self Cleaning Eyes makes it easier for players to not take time to clean their guns on the field.
The DM6 UL Frame features an LED Indicator near the thumb, this provides a quick view on the status of your marker.
One minor nitpick though, for the LE Composite body it should just be Composite body due to Dye continuing production of DMC's.
__________________ We cant stop here, this is bat country. PbN+OC=Ban There is a time for war - Ecclesiastes 3:8 PbN Si Vis Pacem Para Bellum
"Originally posted by adamb2k2: Canfield you're a ****ing *******."
Last edited by CanfieldOO7 : 01-29-2006 at 06:34 PM.
I see lots of errors/untrue facts on that. And some of the rows dont line up. Nice find but needs lots of improvement.
-PM5 has a one-piece Proto barrel. Only the PM6 has a two-piece.
-The DM6 does not have a removable Upgradable Electronics Chip.
-PM6 has the same board as the PM5, which means it also has an Upgradable Electronics Board.
-How can a PM6 has a low-rise and a no-rise? It cant.
-PM6 doesnt have a roller trigger. It has the same as a DM4/PM5.
-You cannot adjust the PM6's trigger from the outside.
-PM6 has a "built-in drop forward" too. Its called an integrated rail btw...
-All guns have a LED program control.
-Define "legal tournament settings". NPPL/uncapped semi? All guns have that...
-What the hell is an Hourglass 45* Grip Frame? You mean the gun comes stock with an UL Frame...
-The DM6 and the PM6 have the same solenoid.
I see lots of errors/untrue facts on that. And some of the rows dont line up. Nice find but needs lots of improvement.
yah... after looking it over again... I agree with you that it needs lots of improvement. I thought is would be useful when I found it... oh well.. i tried...
Good rough draft, now all you need to do is a little bit more research and line up the colums more.
__________________ We cant stop here, this is bat country. PbN+OC=Ban There is a time for war - Ecclesiastes 3:8 PbN Si Vis Pacem Para Bellum
"Originally posted by adamb2k2: Canfield you're a ****ing *******."
I see lots of errors/untrue facts on that. And some of the rows dont line up. Nice find but needs lots of improvement.
-PM5 has a one-piece Proto barrel. Only the PM6 has a two-piece.
-The DM6 does not have a removable Upgradable Electronics Chip.
-PM6 has the same board as the PM5, which means it also has an Upgradable Electronics Board.
-How can a PM6 has a low-rise and a no-rise? It cant.
-PM6 doesnt have a roller trigger. It has the same as a DM4/PM5.
-You cannot adjust the PM6's trigger from the outside.
-PM6 has a "built-in drop forward" too. Its called an integrated rail btw...
-All guns have a LED program control.
-Define "legal tournament settings". NPPL/uncapped semi? All guns have that...
-What the hell is an Hourglass 45* Grip Frame? You mean the gun comes stock with an UL Frame...
-The DM6 and the PM6 have the same solenoid.
Well even if I mentioned that I found the chart (not created by me), I made the mistake in posting it. Therefore, I created a new chart with the recommended changes. Thanks for pointing out the errors/untrue facts. Please let me know if I need to update anything else.
Well first off lemme say this new chart is the shiz but i have found a few things that you should change on it.
DMs dont have Proto One piece barrels.
The DM4/5 Dont come with On/Off ASA'a but they do have Integrated On/Offs.
The DM4 is the only one without a norise.
Lastly all of them have LED programming.
Other than those few things great job.
__________________ We cant stop here, this is bat country. PbN+OC=Ban There is a time for war - Ecclesiastes 3:8 PbN Si Vis Pacem Para Bellum
"Originally posted by adamb2k2: Canfield you're a ****ing *******."
nice job fixing it man this should be helpful to alot of people!!!!!!!!!!!!
Thanks xjunitx... I hope it does help... but I have to thank those that helped me with the corrections. I wasn't planning to create a chart... but I made a mistake posting a chart that I found that was very inaccurate... so I just wanted to fix what I posted
One thing you could possibly change is the feedneck section. A gun can only come with one feedneck. As far as I know only the DM4 and PM5 have low-rises, and the rest have no-rises. Not really an error but could be edited to clear some confusion.
so I just wanted to fix what I posted
