How to adjust - PbNation
Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Archived Thread - Cannot Edit  
Old 08-08-2001, 11:10 AM #1
Paintball Ghost
I am Addicted
Join Date: Jul 2001
Location: Tennessee
 has been a member for 10 years
How to adjust

How do I turn the regs all the way down to 0psi so that I can work up from there and set up my gun.

Also should it be 85psi for lp and 280psi for hp.
Also which guage port is for which regulator.
I like speed
I own speed

Last edited by Paintball Ghost : 08-08-2001 at 11:16 AM.
Paintball Ghost is offline  
Old Sponsored Links Remove Advertisement
Old 08-08-2001, 11:58 AM #2
Join Date: Jun 2001
Location: NY
KMA is a founding member
 has been a member for 10 years
KMA supports DLX Technology
You can kind of tell which plug is LP and which is HP by where they are located, but it is not absolutely clear. The LP plug is on the LCD (left) side of the gun I believe. (Note: The HP plug will indicate the pressure of your inline reg is you have done the LP mod.)

I have my LP reg at 85 and my HP is around 170, but I did the LP mod and I am using a Gladiator. I would get the LP dialed in, and then move to the HP. If you have a chrono available, you can fine tune the HP setting until you get the fps you looking for.

Good luck!
R&M Paintball - Headrush - BlackSheep
100% Positive Feedback
KMA is offline  
Old 08-09-2001, 01:56 AM #3
Join Date: Jun 2001
Location: utah
 has been a member for 10 years
Were is the best place to buy a gladiator reg? Is it one of the best?
boomer is offline  

Posting Rules
Forum Jump