A. It seems that they do, the option is in their check out. Email them
info@firstendeavorpaintball.com
B. Yes their black is actually black. Go to
http://www.firstendeavorpaintball.com/shop/gallery.asp and look for yourself
C. Their current board is set for NXL, PSP, and Strait Semi. I did hear that they were updating them, not sure if it to add modes though.
D. I have heard people have been having success with DM chips from Tadao.
E. Only upgrade that may be needed is a inline reg. That would only be because you don't like the positioning of the output on the stock reg.
F & G. Here's your answer:
Quote:
Originally Posted by aceofspades05
if you look in my pics, on the left side of the gun under the grips where the angel wings are on the grips is a very bright colorful set of LED's. They are EASILY seen in bright daylight. It has a single on/off button much like a shocker without the stupid chrip. The led colors change to signify if eyes are on/off. On first boot the eyes are on, hold the on/off button of a moment to turn them off (led turns blue if i can remember correctly). Hold button in to turn off. If you look at the picture i have of the board you can see a decent size white square under the chip, that is the LED's. Thanks for the comment on the pics who ever comented above.
[EDIT] Just incase you didnt know if there is a loader issue or if eyes get dirty somehow it turns eyes off and caps the ROF at 12 i believe to prevent chopping. But if you maintain your quest you shouldnt ever have that issue, its just a little added feature, i thought i would hate it but it came in handy when a ball broke in a pod that i didnt realize it untill it was in the hopper... ball was crushed entering the firing chamber and got the eyes dirty, eyes shut off and capped the rof, i hit it with a straight shot, ran great remainder of the game. Also, when eyes are on, there is a force fire option. Hold the trigger for a second and it will force the shot if eyes cant detect a ball to clear the breach. If it can detect it, obviously, it will fire it the instant you pull the trigger, but if it cant sence it and you hold it for a second it will fire once. Release and repeat to get this affect over and over again.
H. I'm not 100% sure on this one. I know the factory board functions a lot like a Tadao Board. There are 2 dipswitches in the frame. And seeing that it can take DM chips I would have to say flip one of the switches up (if not both), turn on marker, and then you'll be in programming mode.
As for an Online manual, I know one is in the works. I just don't think that there has been time to update the website for it yet. Once again all I can suggest is to email them and they may be able to send you one via email.
Hope I was a little bit of help to you.
