|
Archived Thread - Cannot Edit
|
08-04-2001, 04:07 PM
|
#1
|
|
Join Date: May 2001
Location: You Guess
|
My mag for your Tricked spyder.
Here it is
Series 7 valve
2001 AGD Bolt
Bottomline asa
Benchmark 6 Stage expansion chamber
BooYaah Elcd grip frame
Micro Line kit with swivel 90 degree elbows
Custom Products 16 inch polished barrel
Custom Stainless steel drop forward
stock grip frame
stock sear assembly
2 AGD repair kits
AGD power tube spacer kit
AGD spring kit for bolt and front part of valve
This gun can run on both CO2 or Air. I have only used air with the gun, but built it for use with CO2 as some of the local fields didnt offer air refills when I was building this gun. Looking for nice spyders plus cash. |
|
|
|
08-04-2001, 07:35 PM
|
#2
|
|
FUEL! FUEL! FUEL!
|
hey how about all the stuff in my sig plus i can throw in money but how much do you want i also have a splatmaster i can throw in
__________________
I dont flame i just share what im thinking
FOR SALE TO YOU:
Ive got spyder tl+, 12 v revvy , benchmark 2x trigger frame(removable stops shortened trigger pull bout half) , clear dye sticky's , kapp gas thru foregrip, WGP reg brand new no scratches,
, 1500 psi aci pressure gauge on aci bottomline,blue macroline setup, shocktech beavertail, WGP beavertail, polished internals and new cup seal, polished ball detent, padded gun case, JT speed pack with 4 blue and clear dye tubes, B.E. 2 pod harness, J.T. black and clear flex 7 no scratches 32* mask's (green, black), clear adjustable elbow
, others i cant think of right now, no tank sold seperatly but shoots very consistent for a spyder with the new reg on nitrogen.
|
|
|
|
|
08-04-2001, 08:30 PM
|
#3
|
|
Join Date: May 2001
Location: You Guess
|
I would take the top seven items and $250 for my mag. Dont need any of the other items.
|
|
|
|
|
08-05-2001, 10:25 AM
|
#4
|
|
Join Date: May 2001
Location: You Guess
|
up
|
|
|
|
|
08-05-2001, 11:12 AM
|
#5
|
|
Join Date: May 2001
Location: Florida
|
2 AGD repair kits
AGD power tube spacer kit
AGD spring kit for bolt and front part of valve
would u sell that seperate?
also how about an ans phase 2 fomie bolt (minus foamie) for ure 2001 stock bolt?
|
|
|
|
|
08-05-2001, 11:15 AM
|
#6
|
|
Join Date: May 2001
Location: You Guess
|
No thanks on the bolt I have tried several bolts and the best one seems to be the stock one in my opinion. I am not going to sell any of the kits at this time. I would like to keep everything together for now. If I change my mind I will let you know though.
|
|
|
|
|
08-05-2001, 11:25 AM
|
#7
|
|
|
Expansion Chamber
Ill trade some **** for your bnchmark xpansion chamber
__________________
Spyder TL, Lapco Drop Forward, 9 volt Revvy, JT X-Fire, 16 alum alloy co2 tank, Houge Grips
|
|
|
|
|
08-05-2001, 12:08 PM
|
#8
|
|
Join Date: May 2001
Location: You Guess
|
Not looking to break it up. Someone has to have a nice tricked spyder that they want to trade for a mag. If not I guess i can just sell it out right. If you want more pics let me know I can get the camera out and take some more pics.
|
|
|
|
|
08-05-2001, 05:34 PM
|
#9
|
|
Join Date: Jun 2001
Location: Where even nitro freezes in the winter, VERMONT
|
I have an almost new(have to be careful when you use that word) Piranha G3 EXT PRO with a stainless steel LAPCO bigshot and blue 12V Revvy. All the cool stuff that comes stock with the EXT is still there also(chrome Pure Energy reg, blue DF, ram air chamber, ect.) I've included a pic below. How much $$$ would I have to throw in for you to call it a deal?
|
|
|
|
|
08-05-2001, 06:03 PM
|
#10
|
|
Join Date: May 2001
Location: You Guess
|
I would probably take your gun and somewhere around $225.
|
|
|
|
|
08-05-2001, 06:44 PM
|
#11
|
|
Join Date: May 2001
Location: You Guess
|
|
|
|
|
|
08-05-2001, 07:58 PM
|
#12
|
|
Join Date: Jun 2001
Location: Where even nitro freezes in the winter, VERMONT
|
ok, you'll have to bring that price down a bit there buddy.
|
|
|
|
|
08-05-2001, 08:05 PM
|
#13
|
|
Join Date: May 2001
Location: You Guess
|
Well unlike most people I am not going to give my mag away. This gun shots fine and just came back from AGD for a tune up with the frame. The booyaah is less than two months old. I have little over $800 in the gun and it is worth what I am asking for it.
|
|
|
|
|
08-06-2001, 04:26 PM
|
#14
|
|
Join Date: Jun 2001
Location: Where even nitro freezes in the winter, VERMONT
|
how many stars are left on the valve or did you use them already and are tring to pass that off as a bonus?
|
|
|
|
|
08-06-2001, 04:48 PM
|
#15
|
|
Join Date: May 2001
Location: You Guess
|
Since it is a classic mag there is One star on the valve. And yes it is still there.
Cant see it very well but it is the black looking dot. If you think I need a better pic of it lmk, but it is there. One star for one classic mag.
By the way when did I say anything about the stars anyways. Now that you bring it up though, this baby still has one star on it that should make it worth at least another $50 or so  JJ
TTT
Last edited by Slick-Ntz : 08-06-2001 at 04:52 PM.
|
|
|
|
|
08-06-2001, 06:33 PM
|
#16
|
|
|
reply
I have a 2000 spyder compact with the following upgrades
1. 2 finger benchmark trigger frame
2. dye sticky grip
3. 32 degrees bob long 5 stage expansion chamber
4. shocktech micro polished drop forward
5. bob long force 2 cyclone bolt
6. 13 inch dye excell
7. asa adapter
8. steel braided hose
This gun shoots great. I havent had any problems with it. It is in great condition. I can throw in some money, you tell me how much. reply a.s.a.p
|
|
|
|
|
08-06-2001, 06:35 PM
|
#17
|
|
|
I also have a stock for it and all the original parts
|
|
|
|
|
08-06-2001, 06:40 PM
|
#18
|
|
Join Date: May 2001
Location: You Guess
|
I think I have a trade for a shocker right now, but if it falls through I would take what you have listed and $275 for my mag.
|
|
|
|
|
08-06-2001, 06:45 PM
|
#19
|
|
|
lower the price to 175 and ill throw in a 32 degrees 4+1 harness with tubes, scott hotshot mask. tiger shark sight rail, and thumb rear velocity adjuster.
|
|
|
|
|
08-06-2001, 06:47 PM
|
#20
|
|
|
and a remote hose
|
|
|
|
|
08-06-2001, 07:07 PM
|
#21
|
|
Join Date: May 2001
Location: You Guess
|
I already have all of these items. Maybe not the ones that you listed but ones like them none the less.
ACI Remote with slide check
APP 4x1
JT spectra tinted
wont use a site rail, dont need thumb adjuster.
Sorry think I still do the $275 if you are interested, but I am waiting to hear from the guy with the shocker to make sure he does or does not want to finish our trade.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
