Rebel '02 E - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 12-24-2005, 10:40 PM #1
Mc Wolf
TTM Region #2 Coordinator
 
Mc Wolf's Avatar
 
Join Date: Sep 2005
Location: Tucson, Arizona
Rebel '02 E

I need help tonight


I have this gun and themacro-line ends are blowing all of the gas out what do I do to fix it so I can wrap and give it to my brother???


all reasonable help is appressiated(sp?)
__________________
Mc Wolf

TTM Region 2 Coordinator
Proud member of Team Tactical Markers
Mess with the best get shot like the rest
Play woodsball:it's good for you
View My Special Ops Brigade Page
PB Nation Feedback Spec Ops Feedback
Mc Wolf is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 12-24-2005, 10:52 PM #2
neo71665
cockers 4 life
 
neo71665's Avatar
 
Join Date: Sep 2001
Location: rison arkansas
 has been a member for 10 years
Sounds like the macro fittings are not sealing. Make sure the ends of the marco are cut straight and pushed all the way into the fittings.
__________________
Proto mask, Halo b, 48/3000 crossfire, redz 3+3 pack, dye lock lids
XSV fan club member #666
custom built cocker
2004 AIM swift body (blue to silver fade), A+ Anno bolt and backblock, CP reg, tickler LPR,MPP ram with QEVs, E2, CP 9 piece barrel kit, MQ valved
hybrid rail,CP on/off
Feedback:http://www.pbnation.com/showthread.p...9#post18816289
ISO a chrome Shockteck beaver tail/snatch grip, if you know where one is or have one for sell PM me
neo71665 is offline  
Old 12-25-2005, 11:21 PM #3
ooglieboogliebob
Lock And Key
 
ooglieboogliebob's Avatar
 
Join Date: Nov 2005
Location: Pasadena, MD
after you seal it .. remember to put teflon tape over all your fittings ... it'll prevent leaking .. mine just leaked today .. so i just wrapped it .. heh
ooglieboogliebob is offline  
Old 12-26-2005, 10:26 AM #4
neo71665
cockers 4 life
 
neo71665's Avatar
 
Join Date: Sep 2001
Location: rison arkansas
 has been a member for 10 years
The tape aint the best thing to use. It will sometimes break off little pieces and get into parts and cause a small leak. On a blowback its not as bad since the ony real sealing part is the cupseal and it will blow the bit out 99% of the time. I suggest either liquid teflon or blue thread locker.
__________________
Proto mask, Halo b, 48/3000 crossfire, redz 3+3 pack, dye lock lids
XSV fan club member #666
custom built cocker
2004 AIM swift body (blue to silver fade), A+ Anno bolt and backblock, CP reg, tickler LPR,MPP ram with QEVs, E2, CP 9 piece barrel kit, MQ valved
hybrid rail,CP on/off
Feedback:http://www.pbnation.com/showthread.p...9#post18816289
ISO a chrome Shockteck beaver tail/snatch grip, if you know where one is or have one for sell PM me
neo71665 is offline  
Old 12-27-2005, 12:13 AM #5
ooglieboogliebob
Lock And Key
 
ooglieboogliebob's Avatar
 
Join Date: Nov 2005
Location: Pasadena, MD
blue thread locker ?? .. loctite ?? .. loctite is good to use .. but i find it a little hard to get off ... and teflon tape ... is easy to my access at this point since i don't have loctite ... and .. if you ever put it on wrong ... you can always just do it again .. on the other hand with loctite you havta wait for it to dry ...
ooglieboogliebob is offline  
Old 12-27-2005, 12:42 AM #6
neo71665
cockers 4 life
 
neo71665's Avatar
 
Join Date: Sep 2001
Location: rison arkansas
 has been a member for 10 years
Loctite is a brand name. As long as you use the low strength stuff (normally blue or green) its not that hard to get off. If you have ever had a leak that was just a PITA, a piece of tape that came loose, you would understand. I would still go for the liquid teflon though over the tape.
__________________
Proto mask, Halo b, 48/3000 crossfire, redz 3+3 pack, dye lock lids
XSV fan club member #666
custom built cocker
2004 AIM swift body (blue to silver fade), A+ Anno bolt and backblock, CP reg, tickler LPR,MPP ram with QEVs, E2, CP 9 piece barrel kit, MQ valved
hybrid rail,CP on/off
Feedback:http://www.pbnation.com/showthread.p...9#post18816289
ISO a chrome Shockteck beaver tail/snatch grip, if you know where one is or have one for sell PM me
neo71665 is offline  
Old 12-27-2005, 01:33 PM #7
ooglieboogliebob
Lock And Key
 
ooglieboogliebob's Avatar
 
Join Date: Nov 2005
Location: Pasadena, MD
i guess i understand your point ... but if a piece of tape came loose i just redo my fitttings .. and that ususally works... but i guess it is a PITA do do it again... so yeah .. just go with neo i guess .. ... i just don't have liquid teflon or loctite at the moment ...
ooglieboogliebob is offline  
 




Posting Rules
Forum Jump