Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 09-05-2005, 04:07 PM #22
nonameputs
 
 
nonameputs's Avatar
 
Join Date: Apr 2005
Location: United States
nonameputs has achieved Level 1 in PbNation Pursuit
nonameputs has perfected Level 1 in PbNation Pursuit
it should be able to cock it, it only takes 90 psi. Plus the air is getting regulated down to 250 at the HPR anyway. Try pushing the bolt pin forward and see if you can get the valve to leak.
nonameputs is offline  
Old 09-05-2005, 05:16 PM #23
empirepaintball257
 
 
empirepaintball257's Avatar
 
Join Date: Aug 2005
Location: NH
empirepaintball257 is for the Gunfight
empirepaintball257 plays in the APPA beginner division
Quote:
Originally Posted by nonameputs
it should be able to cock it, it only takes 90 psi. Plus the air is getting regulated down to 250 at the HPR anyway. Try pushing the bolt pin forward and see if you can get the valve to leak.
i did that and it leaked...
empirepaintball257 is offline  
Old 09-05-2005, 05:31 PM #24
empirepaintball257
 
 
empirepaintball257's Avatar
 
Join Date: Aug 2005
Location: NH
empirepaintball257 is for the Gunfight
empirepaintball257 plays in the APPA beginner division
i just got some more air and when i hooked it up to my pm, the bolt cocked but it sounded like it was leaking from the ram assembly
empirepaintball257 is offline  
Old 09-05-2005, 06:30 PM #25
nonameputs
 
 
nonameputs's Avatar
 
Join Date: Apr 2005
Location: United States
nonameputs has achieved Level 1 in PbNation Pursuit
nonameputs has perfected Level 1 in PbNation Pursuit
Quote:
Originally Posted by empirepaintball257
i did that and it leaked...

It's supposed to leak. What you're doing is forcing the valve open. The reason I had you do that was to see if it's the HPR, and it's not. Does your noid click when you try and fire it? If it does, then the problem lies somewhere after your HPR, but before your noid (LPR, barbs, hoses, etc.). If the noid doesn't even click when you try to fire, then your noid is at least part of the problem. There is another thread where a guy is having the same problem as you.
nonameputs is offline  
Old 09-05-2005, 06:39 PM #26
evil inferno (Banned)
My user title sucks.
 
evil inferno's Avatar
 
Join Date: Jun 2005
Location: IL
i have a problem with my hpr/lpr too. Well it goes down like this. My velocity wont go past 280 unless my my hpr pressure is at 300psi. i dont want to have the pressure this high i want it at 250. can some one help.

p.s sorry for hijacking your thread. its just the problems are sorta simular.
evil inferno is offline  
Old 09-05-2005, 06:45 PM #27
empirepaintball257
 
 
empirepaintball257's Avatar
 
Join Date: Aug 2005
Location: NH
empirepaintball257 is for the Gunfight
empirepaintball257 plays in the APPA beginner division
Quote:
Originally Posted by nonameputs
It's supposed to leak. What you're doing is forcing the valve open. The reason I had you do that was to see if it's the HPR, and it's not. Does your noid click when you try and fire it? If it does, then the problem lies somewhere after your HPR, but before your noid (LPR, barbs, hoses, etc.). If the noid doesn't even click when you try to fire, then your noid is at least part of the problem. There is another thread where a guy is having the same problem as you.
My noid clicks when i try to fire it, also when i air my pm up, the bolt now cocks but it leaks near the ram assembly

Last edited by empirepaintball257 : 09-05-2005 at 06:47 PM.
empirepaintball257 is offline  
Old 09-05-2005, 08:07 PM #28
etipp98
LBJ=FGT
 
etipp98's Avatar
 
Join Date: Apr 2003
Location: Parma
 has been a member for 10 years
try to turn the LPR down now since the bolt cocks back now. To much pressure from the LPR causes the noid to leak.
__________________
etipp98 is offline  
Old 09-05-2005, 08:48 PM #29
nonameputs
 
 
nonameputs's Avatar
 
Join Date: Apr 2005
Location: United States
nonameputs has achieved Level 1 in PbNation Pursuit
nonameputs has perfected Level 1 in PbNation Pursuit
Quote:
Originally Posted by etipp98
try to turn the LPR down now since the bolt cocks back now. To much pressure from the LPR causes the noid to leak.
Do this ^^^ and also make sure the ram cap is on tight.
nonameputs is offline  
Old 09-06-2005, 09:10 AM #30
empirepaintball257
 
 
empirepaintball257's Avatar
 
Join Date: Aug 2005
Location: NH
empirepaintball257 is for the Gunfight
empirepaintball257 plays in the APPA beginner division
Quote:
Originally Posted by etipp98
try to turn the LPR down now since the bolt cocks back now. To much pressure from the LPR causes the noid to leak.
When i turned the LPR down the bolt uncocks and the solenoid leaks.
empirepaintball257 is offline  
Old 09-06-2005, 01:04 PM #31
etipp98
LBJ=FGT
 
etipp98's Avatar
 
Join Date: Apr 2003
Location: Parma
 has been a member for 10 years
Quote:
Originally Posted by empirepaintball257
When i turned the LPR down the bolt uncocks and the solenoid leaks.
sounds like your LPR sucks too then. I am going to e-mail ICD and tell them whats up!
__________________
etipp98 is offline  
Old 09-06-2005, 01:12 PM #32
empirepaintball257
 
 
empirepaintball257's Avatar
 
Join Date: Aug 2005
Location: NH
empirepaintball257 is for the Gunfight
empirepaintball257 plays in the APPA beginner division
Quote:
Originally Posted by etipp98
sounds like your LPR sucks too then. I am going to e-mail ICD and tell them whats up!
good idea... hopefully they can fix the problem
empirepaintball257 is offline  
Old 09-06-2005, 03:08 PM #33
empirepaintball257
 
 
empirepaintball257's Avatar
 
Join Date: Aug 2005
Location: NH
empirepaintball257 is for the Gunfight
empirepaintball257 plays in the APPA beginner division
When i air my promaster up it cocks and then leaks around the ram assembly, when i try to turn my lpr down, the gun uncocks and leaks from the solenoid.
empirepaintball257 is offline  
Old 09-06-2005, 03:20 PM #34
paintballa8224
Engineer in the Making
 
paintballa8224's Avatar
 
Join Date: Nov 2004
Location: Clarkson University
your solenoid screws tight??
paintballa8224 is offline  
Old 09-06-2005, 03:22 PM #35
empirepaintball257
 
 
empirepaintball257's Avatar
 
Join Date: Aug 2005
Location: NH
empirepaintball257 is for the Gunfight
empirepaintball257 plays in the APPA beginner division
Quote:
Originally Posted by paintballa8224
your solenoid screws tight??
yes they are
empirepaintball257 is offline  
Old 09-06-2005, 03:24 PM #36
ICD-EVIL
Xbox360 games F/S in sig
 
ICD-EVIL's Avatar
 
Join Date: Jul 2005
Location: SE Wisco
i had this.. problem.. i garauntee you your regs are not set correctly.. i dont care if you think thney are.. i spent 2 hours getting mine to work like a charm.. your regs are not properly set. up your HPR a lil bit..

the only problem i have is it leaks by my bolt.. bu when i push the bolt forward it stops leaking.. i think someone else had this problem awhile back.. but i cant remeber.. pooh wanna help me out?
__________________
THE OHIO STATE UNIVERSITY
OFFICIAL GWC #29
ST: Politics
Hot HB Flex and Blue Ventz F/S
1 of 1 FreeFlow SFT Shocker F/S
PBN (+26/-0)
ICD-EVIL is offline  
Old 09-06-2005, 03:26 PM #37
ICD-EVIL
Xbox360 games F/S in sig
 
ICD-EVIL's Avatar
 
Join Date: Jul 2005
Location: SE Wisco
also the regs are INCREDIBLY TOUCHY.. slight adjustments!
__________________
THE OHIO STATE UNIVERSITY
OFFICIAL GWC #29
ST: Politics
Hot HB Flex and Blue Ventz F/S
1 of 1 FreeFlow SFT Shocker F/S
PBN (+26/-0)
ICD-EVIL is offline  
Old 09-06-2005, 03:36 PM #38
empirepaintball257
 
 
empirepaintball257's Avatar
 
Join Date: Aug 2005
Location: NH
empirepaintball257 is for the Gunfight
empirepaintball257 plays in the APPA beginner division
If im running my HPR at about 225 isn't it tuned correctly?
empirepaintball257 is offline  
Old 09-06-2005, 06:42 PM #39
empirepaintball257
 
 
empirepaintball257's Avatar
 
Join Date: Aug 2005
Location: NH
empirepaintball257 is for the Gunfight
empirepaintball257 plays in the APPA beginner division
come on i need some help
empirepaintball257 is offline  
Old 09-07-2005, 04:03 PM #40
empirepaintball257
 
 
empirepaintball257's Avatar
 
Join Date: Aug 2005
Location: NH
empirepaintball257 is for the Gunfight
empirepaintball257 plays in the APPA beginner division
any help is greatly appreciated
empirepaintball257 is offline  
Old 09-07-2005, 04:33 PM #41
bobide
That's No Zaku Boy
 
bobide's Avatar
 
Join Date: Sep 2004
bobide supports Cereal Killerz 2
bobide is an NCPA player
bobide plays in the APPA D5 division
250 psi is the correct pressure for a promaster.
bobide is offline  
Old 09-07-2005, 04:38 PM #42
PhattyMcPhatt
"Get a Yob, Mayn"
 
PhattyMcPhatt's Avatar
 
Join Date: Sep 2004
Location: Midvale, UT
PhattyMcPhatt is a Supporting Member
Quote:
Originally Posted by etipp98
sounds like your LPR sucks too then. I am going to e-mail ICD and tell them whats up!
Plan on them taking a year to fix it.
__________________
Myfeed back:
http://www.pbnation.com/showthread.php?t=1451971
PhattyMcPhatt is offline  
 




Posting Rules
Forum Jump