How to fine tune your gun.

Mr. Tapes · 09-03-2005, 11:55 AM

Quote:

Originally Posted by solmyr

Nicely done!

I say sticky this!

Yeah, put it in the sticky...so no one will read it.

Flesh Eater · 09-03-2005, 06:19 PM

thats why i said just sticky it not put it in the ulti sticky. if it goes to the ulti then it wont get read. we really need this just normal sticked.

YimSta007 (Banned) · 09-03-2005, 07:05 PM

wow thanks!

Flesh Eater · 09-05-2005, 05:02 AM

shockerdomination · 09-05-2005, 03:18 PM

excellent description...sticky.

notloc08 · 09-05-2005, 05:17 PM

stickitize this!

solmyr · 09-06-2005, 04:42 AM

I have a DM4 with stock bolt and LPR. do you think that I can get the LPR down to 2.45 turns useing slick honey? And what is the lowest ammount of turns that you can do with a stock dm4 bolt and lpr?

bdpAKAknox (Banned) · 09-06-2005, 05:15 AM

Quote:

Originally Posted by solmyr

I have a DM4 with stock bolt and LPR. do you think that I can get the LPR down to 2.45 turns useing slick honey? And what is the lowest ammount of turns that you can do with a stock dm4 bolt and lpr?

Go to the chrono and find out for yourself.

Flesh Eater · 09-06-2005, 07:56 AM

i belive that you COULD, yes. use some slick honey and clean and relube your gun. then reset your regs. by raising your hyper a bit you can lower your lpr a bit. but also by doing this you will have to lower your dwell also, just a tad.

Flesh Eater · 09-06-2005, 11:21 PM

so you can all find this here it is.

Flesh Eater · 09-07-2005, 07:36 AM

I had a convo with someone from LA Exoudus last night and we were talking about how to set up one of his protos. By doing what i said in this thread he got his lpr from 3 full turns out do 1.25 turns out. He was soo happy. was going to post parts of the convo but i forgot and turned off my computer. Just goes to show that it really works. If your running your lpr at anything above 2 i sugest doing this thread.

solmyr · 09-07-2005, 08:09 AM

My DM4 is working with the LPR at 2.75 Dwell 17, zero shoot down. The way I tested shot down was to put a full hopper of paint on my marker, set up my S.I.T.H to NXL mode uncapped and let her rip.But I tunned my marker a bit diffrently then what you wrote.

mASSive~b · 09-07-2005, 09:41 AM

Flesh Eater · 09-07-2005, 11:08 AM

solmyr, what did you do differenty to tune your marker?

solmyr · 09-07-2005, 11:22 AM

1) Lube/inspect everything hyper 2 with Dow33, LPR with slick honey
2) Set the Hyper 2 so that it didnt send any air into the marker
3) Started to unscrew the Hyper 2 untill the leak out of the back of the bolt stoped
4) Set the LPR to 2.75 turns out
5) Started to shoot over the chrono and I was shooting untill I was around 280-ish
6) Turned on uncaped NXL mode went outside, stood at a elevated place and shoot a hopper of paint to see if I had shootdown.

When I was setting up everything I had velocity spikes that I write that up to the reg's being broken in again after they have been lubed up again with fresh lube. But at the end of my setting up process I my FPS was +-3.

So now I have:

Dwell: 17 (I might pick this up to 18)
LPR: 2.75 (just under 3)
Velocity: 280 +-3

ry_dogg68 · 10-10-2005, 03:09 PM

quick noob question? When you say "***You might have to adjust your lpr as your are adjusting your dwell to get your gun to work correctly. ***" is you LPR going to be going up or down as you increase your dwell?

etang858 · 10-10-2005, 03:45 PM

subscribed

shocktechautokid · 10-10-2005, 04:27 PM

sticky or link to FAQ

pbmadness21 · 10-24-2005, 10:34 AM

very confused.. someone help please.

mASSive~b · 10-24-2005, 10:55 AM

i did this and got my gun to run at 2.75 turns out from my lpr but i was having bad fsdo with the abs on ( dmc )

Flesh Eater · 10-31-2005, 10:52 AM

working on updating this. will edit first post when done to help you get the best consistancy and efficency.