I have gotten a couple of request for a step by step of the soft ears mod, so here we go. I will try my best so hold on for the ride.
I start with a sheet of foamies that I buy at Wal-Mart. I buy the sheet that comes with glue on one side so I dont have to worry about putting glue and this way its clean and very strong when put together. I basically use a scissors for cutting out the outline of my soft ear design and then a hobby knife for the complicated designs on the inside.
Since I use Fomies Sheets w/ Glue I cut 3 pieces. Heres the tricky part. I cut the inside and outside part so that they mirror themselves otherwise the glue part on the inside will have nothing to stick to besides your ears. this way the outside glues to the middle sheet and the inside also glues to the middle sheet and it comes out very strong.
As can be seen the only sheet that I cut the design in to is the outside sheet so that the other 2 sheets stay very strong.
and then you have the finished product... Color combinations is up to personal taste and the options are endless. if you cant draw to save your life you can trace the design on a paper, cut out the paper and trace the design on the fomie sheet
This is a little bonus, a camo painted vforce with custom soft ears and a custom strap. I hope you enjoy.