Reverse Trigger Mod - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 08-04-2005, 01:58 PM #1
X-zile119
pop n lock
 
X-zile119's Avatar
 
Join Date: Jul 2005
Location: Columbus, Ohio
Reverse Trigger Mod



I don't know if anyone cares, but by reversing the trigger, i've found that i can get a higher rate of fire. To do this mod, you simply take the trigger out, take out the bottom adjustment screw, and put it in backwards. The top adjustment screw will restrict the trigger movment as normal, but it may need to be screwed out a lot. Backwards, the trigger is at a very unusual angle, but as you pull it, the bottom hits the edge of the trigger frame, and allows you to fire faster. Aslo, because the trigger is so far back it gives you more room in the gaurd for gloves.
__________________
Team Psychotic

Last edited by X-zile119 : 08-04-2005 at 02:03 PM.
X-zile119 is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 08-04-2005, 02:05 PM #2
spizot
 
 
Join Date: Aug 2005
spizot is a Supporting Member
very interesting, but i dont see how it will increase ROF. this is at the same angle the Evil Pimp's trigger is at.
spizot is offline  
Old 08-04-2005, 02:07 PM #3
AggsTheMan
Enlist you SISSY!
 
AggsTheMan's Avatar
 
Join Date: Jun 2005
Location: Osan Air Base, Korea
AggsTheMan is a Supporting Member
I was wondering when someone would venture to do this. I had a theory too, but I never felt like acting on it.

It helps your by putting the trigger at a different angle that is more confortable for the fingers.
__________________
:: I play with NoRegard ::
The truth will set you free. But first, it will piss you off.


Atheists do it BETTER!
AggsTheMan is offline  
Old 08-04-2005, 02:10 PM #4
X-zile119
pop n lock
 
X-zile119's Avatar
 
Join Date: Jul 2005
Location: Columbus, Ohio
I find it more comfortable, and i think it is faster becuase it can bounce off of the trigger frame at the end of the pull, like a three way adjustable trigger.
__________________
Team Psychotic
X-zile119 is offline  
Old 08-04-2005, 02:39 PM #5
spizot
 
 
Join Date: Aug 2005
spizot is a Supporting Member
i guess i will have to try it out.
spizot is offline  
Old 08-04-2005, 03:42 PM #6
The Real Doughboy
.
 
The Real Doughboy's Avatar
 
Join Date: Jan 2005
Location: South Carolina
i just did it, it's ok, a little bit slower rof than the normal way for me, i guess cuz i used tape for the magnet mod and the trigger is sticking to the glue from the tape.
The Real Doughboy is offline  
Old 08-04-2005, 06:47 PM #7
Dudemonkguy
www.skype.com
 
Dudemonkguy's Avatar
 
Join Date: May 2005
Location: 703-571
if you do this.. you can actually have the same results as the trigger switch flip mod by only taking of the metal piece on the trigger switch. i havent done it yet but it looks promising!!
Dudemonkguy is offline  
Old 08-04-2005, 06:50 PM #8
smitty192
*****, whats the deal?
 
smitty192's Avatar
 
Join Date: Mar 2005
Location: Baton Rouge, LA
i tried taking the metal piece off, but my trigger wouldnt touch the button when it was reversed or regular.
__________________
My Feedback 9+ 0-
XBL GT:Smitty2033
smitty192 is offline  
Old 08-14-2005, 10:50 PM #9
Army_Ranger2888
im not in the army
 
Army_Ranger2888's Avatar
 
Join Date: May 2005
Location: Texas
Army_Ranger2888 supports Cereal Killerz 2
Army_Ranger2888 owns a Planet Eclipse Ego
how do you take the trigger out
Army_Ranger2888 is offline  
Old 08-14-2005, 10:54 PM #10
ah_skeet (Banned)
 
ah_skeet's Avatar
 
Join Date: Apr 2005
Location: katy, tx
theres a pin at the top of the trigger, punch it out
ah_skeet is offline  
Old 08-15-2005, 04:26 AM #11
SuperGatorHator
Ohhhhh yeah!
 
SuperGatorHator's Avatar
 
Join Date: Apr 2005
I was actually considering doing this with the wave trigger, maybe i will...
__________________
Wrath Legion - Silver Division Special Forces
114CU 3000Psi tank Bullet Drop Cp One Piece Macroline Eggy 2 W/ Y Board(heavily modded), T-board, fbm wave trig, black grips, ram mod. Sign Petition Here
Halo 2 cheating for dummies
My Custom Gun Pics
(\ /)
(0.0)
(> <)
copy bunny into your profile; help him achieve world domination
SuperGatorHator is offline  
Old 08-15-2005, 12:38 PM #12
Drox
Bang Bang
 
Drox's Avatar
 
Join Date: Oct 2004
Location: Ft. Wayne, IN
 has been a member for 10 years
Drox is playing at Living Legends III
Pimp kit? Wrath? = Wrath kit LMAO
Looks similar to a Pimp trigger.
__________________
FeedBack
-Black Omen Machine Gun - Green/Black Acid VSC Phantom - Silver Wrath - Black Mini_
Evil Paintball Boss Paintball Products ScenarioDreams Deadlywind Wevo Paintball
Drox is offline  
Old 08-15-2005, 02:33 PM #13
sh4d0w1
 
 
sh4d0w1's Avatar
 
Join Date: Jul 2005
Location: Box
Ok i did this mod feedback i don't remember what side i punched it out but it would of game out easier if i punched it out from a certain side any1 know that side it would help other people anyway i did the mod and increased my rof and it works great and you might wanna put longer screws in because to make the trigger pull as small as it goes you have to push the bottom screw in almost so much its falling out at least on how i did it so i put a longer bottom screw in and a taller top screw but the top 1 didn't matter as much. but this mod is great and easy
__________________
The end times are upon us...

Got flying spaghetti monster?
sh4d0w1 is offline  
Old 08-15-2005, 03:31 PM #14
evil1.5omen
 
 
Join Date: Jul 2005
Location: NuJaru
to take the pin out, you have to knock it out by hitting the pin from the right side (when looking at it as if you were actually shooting the gun). Listen when i put in the trigger that i made for my cousins wrath, i noticed the stock trigger has the top right side(when looking at the trigger head on) cut at 45 degrees, so that it doesnt grab or dig into the tube running through the frame of the gun.
I was wondering/curious if when you flipped the trigger if it hit the tube or did you not notice, the tube might be slowing the trigger down aa bit too. I would double check for saftey of the tube, and also for extra rof.

Maybe if its flipped you could drill out a small hole on the bottom of the trigger and install a small magnet and then glue the other to the frame, that would make it look nice and smooth

let me know your findings
evil1.5omen is offline  
Old 08-16-2005, 12:10 PM #15
sh4d0w1
 
 
sh4d0w1's Avatar
 
Join Date: Jul 2005
Location: Box
anyway the trigger is preety sweet when your just playing with it not gassed up and shooting but i gassed it up shot 2 or 3 and they go 5 feet and drop lol anyway i don' t think its the mod i pinched wires in the grip but any suggestions be great..
__________________
The end times are upon us...

Got flying spaghetti monster?
sh4d0w1 is offline  
Old 08-16-2005, 08:48 PM #16
evil1.5omen
 
 
Join Date: Jul 2005
Location: NuJaru
its probably the hose which allows the air to go through the grip, flipping the trigger without grinding the othe side down on the top probably pinched shut the tube not allowing the air to get through, check it out

again let me know about your findings on my other post aight peace
evil1.5omen is offline  
Old 08-16-2005, 09:13 PM #17
X-zile119
pop n lock
 
X-zile119's Avatar
 
Join Date: Jul 2005
Location: Columbus, Ohio
Yea, i ground down the entire top of the trigger so its like this - ^
__________________
Team Psychotic
X-zile119 is offline  
Old 08-19-2005, 09:16 PM #18
xzile_frontman
Columbus hardcore xX614Xx
 
Join Date: Jul 2005
Location: Killumbus ohio
i have tried that exact gun out before and after and it is a lot easier to achieve a high rate of fire
__________________
WRATH LEGION <> DEVIL DEVISIONTEAM X-ZILE <> "WE KILL SUCKERS"
Bunkering moms since 89'
http://www.pbnation.com/showthread.php?t=1239353 buy my ps2 games
check out my teams site
Free Stickers
xzile_frontman is offline  
Old 08-22-2005, 05:24 PM #19
xzile-capt
TEAM PSYCHOTIC
 
xzile-capt's Avatar
 
Join Date: Aug 2005
Location: groovey city ,ohio
Thumbs up

if also tried this gun way eaiser to shoot than before do this and u will be sweet ohhh yeaaaa
__________________
XSV FANCLUB 1070 \/ THOMAS TAYLOR FANCLUB 93
DYNASTY FANCLUB 256 \/ RYAN GREESPAN FANCLUB 125
MW
Dust blue pm6
xzile-capt is offline  
Old 08-22-2005, 07:59 PM #20
t0~R1PP3R
 
 
t0~R1PP3R's Avatar
 
Join Date: Jul 2005
Location: Florida
Quote:
Originally Posted by X-zile119


I don't know if anyone cares, but by reversing the trigger, i've found that i can get a higher rate of fire. To do this mod, you simply take the trigger out, take out the bottom adjustment screw, and put it in backwards. The top adjustment screw will restrict the trigger movment as normal, but it may need to be screwed out a lot. Backwards, the trigger is at a very unusual angle, but as you pull it, the bottom hits the edge of the trigger frame, and allows you to fire faster. Aslo, because the trigger is so far back it gives you more room in the gaurd for gloves.
it also gives u no room behind the trigger so u shoot ur self in the foot
t0~R1PP3R is offline  
Old 09-29-2005, 06:52 AM #21
Wrath_Lord
...I am NOT God...
 
Wrath_Lord's Avatar
 
Join Date: Aug 2005
Just tried this... works great... just haven't gassed it up yet... so moment of true is upon me! if it pinches i'll just stick it back on how it was, if it doesnt then i think i'll keep it. I dont know about more comfortable, but it certainly does fire a bit faster.
__________________
#1 ][ Black SP Ion
][ CP Sling Blade Trigger
][ Hybrid 45* Shizzle Bad Guy grips
][ SP AA Barrel

#2 ][ Gen. I Black Wrath
][ Custom Trigger

Yes... thats right, I OWN BOTH an ION and a Diablo Wrath! and IMO the ION is FAR better!!!
Wrath_Lord is offline  
 




Posting Rules
Forum Jump