Mad Bounce? - PbNation
Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 07-31-2005, 10:51 PM #1
*Up Wind Shot*
Run the Future
 
*Up Wind Shot*'s Avatar
 
Join Date: Apr 2004
 has been a member for 10 years
Mad Bounce?

Ok here’s the problem... lately my TES has been giving me a hard time first I was having leaks every which way, a bit of Teflon tape and new orings... problem solved. Secondly I was having major de-cocking issues, I tried everything, lighter spring, higher pressure... etc. no matter what I tried it never went away. So finally the other day the problem decided to disappear, but unfortunately my TES decided to have major bouncing issues that day. So my question is how can I get rid of the bounce? Are there any trigger adjustments that might help? I still have the stock trigger switch and I was playing in "auto 20" because semi mode is whack and it shoots like 5 bps in "semi 20" my pressure was about 400 psi and I was shooting about 275 - 285 fps. ? Any ideas?
__________________
paintball
*Up Wind Shot* is offline  
Old Sponsored Links Remove Advertisement
Advertisement
Old 07-31-2005, 10:58 PM #2
qhimq
Tragic
 
qhimq's Avatar
 
Join Date: Sep 2004
Location: chicagoish, IL
 has been a member for 10 years
sounds like bad sear and/or striker

try coin the noid
__________________
Feedback 29+ / 0-
The Tragedy- Custom Super Marker v.9
Silver Moved Up Frame T1 sold
DRAGUN B/S/T

(AIM: qhimq)(Yahoo: qhimq) (PBR: qhimq)
qhimq is offline  
Old 07-31-2005, 11:06 PM #3
*Up Wind Shot*
Run the Future
 
*Up Wind Shot*'s Avatar
 
Join Date: Apr 2004
 has been a member for 10 years
coin the noid? would that happen to be is the stickies?

Any Other Ideas?????? thx
__________________
paintball
*Up Wind Shot* is offline  
Old 08-02-2005, 01:34 PM #4
*EM1-Master*
Schwang
 
Join Date: Dec 2003
Location: Atlanta, GA
*EM1-Master* is a Supporting Member
 has been a member for 10 years
By "coin the noid," he meant shim it... Put a dime or penny behind the solenoid plunger. Not that it would fix your problem at all... I don't know... T1's and TES tend to have some bounce problems... Get a T-board and turn the debounce up...
__________________
Rock out with your socks out

Last edited by *EM1-Master* : 08-02-2005 at 01:37 PM.
*EM1-Master* is offline  
Old 08-02-2005, 02:18 PM #5
half-step
 
 
half-step's Avatar
 
Join Date: Jun 2004
Location: WI
half-step is a Supporting Member
 has been a member for 10 years
The coin mod would lower the sear and probably make the problem worse.
__________________
Red-Black T1 * Palmer Stablizer & Micro-Rock * CP Rail w/On-Off * Eclipse QEV * ACP Blue Bolt w/X-rings * OGI Speedneck * J&J 2-Piece 14" Barrel * Egg w/Z-Board * Rocket Valve * ACPB Delrin Ram

Grey TES * CP Reg * Bullet Drop w/On-Off * Bandit Bolt * 50g Switch * 3 Point Stock Trigger Mod * Rocket Valve * Clamp Feedneck * JAVA Recharge Mod

Dragun Mods*Manuals
My Feedback
half-step is offline  
Old 08-02-2005, 03:12 PM #6
tombstone
 
 
tombstone's Avatar
 
Join Date: Nov 2004
Location: top secret
tombstone is a Supporting Member
 has been a member for 10 years
Quote:
Originally Posted by half-step
The coin mod would lower the sear and probably make the problem worse.
Yep
__________________
FEEDBACK
tombstone is offline  
Old 08-02-2005, 05:14 PM #7
qhimq
Tragic
 
qhimq's Avatar
 
Join Date: Sep 2004
Location: chicagoish, IL
 has been a member for 10 years
Quote:
Originally Posted by half-step
The coin mod would lower the sear and probably make the problem worse.
unless the sear is too high. which is not very likely
__________________
Feedback 29+ / 0-
The Tragedy- Custom Super Marker v.9
Silver Moved Up Frame T1 sold
DRAGUN B/S/T

(AIM: qhimq)(Yahoo: qhimq) (PBR: qhimq)
qhimq is offline  
Old 08-02-2005, 05:17 PM #8
qhimq
Tragic
 
qhimq's Avatar
 
Join Date: Sep 2004
Location: chicagoish, IL
 has been a member for 10 years
Quote:
Originally Posted by *Up Wind Shot*
... Secondly I was having major de-cocking issues, I tried everything, lighter spring, higher pressure... etc.
this usually happens when u have a low batt or a too high sear.
__________________
Feedback 29+ / 0-
The Tragedy- Custom Super Marker v.9
Silver Moved Up Frame T1 sold
DRAGUN B/S/T

(AIM: qhimq)(Yahoo: qhimq) (PBR: qhimq)
qhimq is offline  
 




Posting Rules
Forum Jump