Find fields & stores near you!
Find fields and stores
Zipcode
PbNation News
PbNation News
Community Focus
Community Focus

 
Archived Thread - Cannot Edit  
Old 07-30-2005, 07:06 PM #1
APham23
G-Unit
 
APham23's Avatar
 
Join Date: Jan 2005
Location: 703 VA
velocity/recocking problemo

ok i was shooting really low velocity and i had a real hard time getting it to go high (adjusting the inline reg)
so i just took my brother D-reg off his dfly cuz his was set to a good 270-275ish

ok then it worked good for like one shot and had problems recocking. i put the IVG in a lil bit to help out with the velocity but that made it so it couldnt recock, so i turned it out and the velocity went back down to the like 190ish fps it was at teh start. so i screwed the IVG a lil ways back in and turned up the LPR still wouldnt recock. if i turned it up any higher it would leak and have this weird sound like a dial up modem was dialing haha out of the front solinoid.

thanks for reading this stupid sh*t.
any idea?

(drallion by the way)
my thoughts: springs too weak
LPR is really f'ed up
__________________
Olive PM6 F/S LNIB pm me
Sell me your PM6 boards! Virt., Tadoa, Lucky w/ spitfire... etc.
APham23 is offline  
Old 07-31-2005, 08:06 PM #2
APham23
G-Unit
 
APham23's Avatar
 
Join Date: Jan 2005
Location: 703 VA
anyone? (sorry for uping this, i really need this fixed)
__________________
Olive PM6 F/S LNIB pm me
Sell me your PM6 boards! Virt., Tadoa, Lucky w/ spitfire... etc.
APham23 is offline  
Old 08-04-2005, 12:56 PM #3
GoblyGoop
 
 
GoblyGoop's Avatar
 
Join Date: Feb 2005
ok..stop f'ing with the screws for a second. It normally just makes things worse.
Things you need to do.

1) new battery (fresh)
2) put back on your reg that you are going to use on the gun. Set it to about 200-250
3) unscrew your velocity screw till its flush with the back of the gun, then turn it in 4 full turns.
4) now time it. i posted a guide on this.
GoblyGoop is offline  
 




Posting Rules
Forum Jump