Max flo on/off leak - PbNation
Find fields & stores near you!
Find fields and stores
PbNation News
PbNation News
Community Focus
Community Focus

Archived Thread - Cannot Edit  
Old 07-23-2001, 11:10 PM #1
FooSheezee's Avatar
Join Date: Jul 2001
Location: NM
 has been a member for 10 years
Max flo on/off leak

I just got my max flo 45/45 (new style reg and milling) and the on off no longer works. If you turn it off and shoot it will slowly recharge to a point where the gun will fire normally (slowly), my teamates and the airsmith say it is the on offs oring and that they chop really easily. Any sugestions will be appreciated. Also, do you know if Smart Parts will be at the Zap in Colo?

The Front Lines
Code of Hammurabi
Feed Back
FooSheezee is offline  
Old Sponsored Links Remove Advertisement
Old 07-24-2001, 08:27 PM #2
Join Date: May 2001
 has been a member for 10 years

its easy to do, just take out the on/off by removing the retainer screw on the top of the manifold. Flip over the middle oring if its damaged and grease it up and put it back in. Just dont do what I did and put it in backwards so it scratches the switch with the retainer screw... good luck
mrbill is offline  
Old 07-25-2001, 05:34 PM #3
Alphy's Avatar
Join Date: Jul 2001
 has been a member for 10 years
yep, theres an oring in there that gets nicked pretty easy. Make sure you drain your tank empty before removing the on/off.
Alphy is offline  
Old 07-26-2001, 05:04 PM #4
Socially Unacceptable
MUNKEY13's Avatar
Join Date: Jul 2001
Location: New Mexico
 has been a member for 10 years
See Bam
I told you that was what you had to do but noyou dont believe me. Why wouldnt you believe me.

you stink....
and I will pick you up around 9 in the morning
for the road trip to zap.


Munkey wurks "technical knowledge, utter disregard for public safety"
MUNKEY13 is offline  

Posting Rules
Forum Jump