[paquu]

ok i know this is a real dumb question: the screws connecting the trigger frame to the gun are wicked tight. im trying to unscrew em but i dont know which wasy to turn em. i know "lefty loosy, right tighty"lol but it all depends the way u look at it. i tried turning it left but when i turned hard it clicked and almost stripped. so looking the gun lcd facing you with the barrel pointing left, do i turn the allen wrench toward the barrel or toward the opposite direction . i just dont wanna strip the screws. thx

[jjdustr340]

Toward the barrel.

[Lynxx]

counter clockwise, just think which way a clock hand moves on a clock, and do it backwards

and yeah that saying doesnt work well..once you pass a certain point of turning it you are now turning it to the left, then you pass another point and its right again..

[paquu]

lol, nvm got it.(almost breakin the allen wrench and punchuring a hole on my palm)

[paquu]

hey but heres another dumb question, how do u remove those hoses that go to the noid

[Lynxx]

i dont know how to remove them from the noid.. not really a need to..but to get them off the fittings, pull the little blackish ring into the fitting, and pull on the hose

[paquu]

oh ok, got it. i was asking bout the fittings. and umm if u didnt get my pm i said i didnt need the jumper, the paper clip worked fine, but thx for the offer

[smitty192]

actually it was my offer to him, but hey, who notices.

[paquu]

lol me with the questions, umm heres another, how do u take out the thing in the back with the devil jewl on it?, just twist it?

[smitty192]

yea just unscrew it counter clockwise

[paquu]

thx, man idk y everything is so tight on here

[paquu]

if i cant screw the ram cap back in flush with the gun, what will happen? i unscrewed it alright but screwing it back in is a nightmare. my dad couldnt even screw it back in.(dont ask how i got it off)

[smitty192]

what do you mean you cant get it back in? it should just screw right in easy as pie.

[paquu]

dude my dad couldnt even get it in. its not budging after it down to 3/16 of an inch to flush with the gun,whats guna happen if i cant get it flush?

[smitty192]

o it has an oring. its not suppsoed to be exactly flush with the gun, lol

[paquu]

i know thats, but there is still more room to be turned in....like i asked, whats gun happen if its not fully screwed in?

[jjdustr340]

Just screw it in as far as it will go, then back it out until the LP hose fitting is on the bottom. Don't forget to check and make sure that the bolt isn't sticking into the feed path.

[paquu]

so i take it nothing wrongs guna happen if i make sure everything is back connected and the bolt isnt blocking the feed port?

[paquu]

as long as its in enough that the ram wont fall outa postion in the cap?

[smitty192]

well is the ram in the ram cap, lol. if its not it wont go in

[jjdustr340]

Everything will be fine. The ram cap is made to have a little slack in it , thats why it has an o-ring on it. Mine could turn in about another 1/4 turn, but then the fitting won't line up with the hose. It works just fine though.