[corebu]

Can you test if the eye works by sticking your finger in and shooting it fast with just the battery on? I recently played with the eye on and it was only shooting one ball per second and i wasn't using dark paint.

[dragon102988]

uh u can do that but watch ur fingers might have one or 2 taken off

[rdkingrebel]

i think he ment with out air

[CRaKeR]

no u can't test ur eyes that way...the eye actually has to cycle paint its the only real way to test it

[corebu]

well how fast will it shoot with the eye on walking the trigger? I have a halo b.

[AzNcHoPsTyKs]

...as fast as you pull the trigger, the eyes only there to detect paint, it doesnt slow the ugn down unless you have a revvie and can outshoot it

[coolblondeguy14]

yes u can, just take the bolt out.. w/o air just click the trigger,a nd move your finger around... check the bps by going to the rate section on ur lcd

[imguessingurgay]

Originally posted by AzNcHoPsTyKs
...as fast as you pull the trigger, the eyes only there to detect paint, it doesnt slow the ugn down unless you have a revvie and can outshoot it

well without the eyes on i can do 20bps and with them on i can do 12-15 , i have a tournmanet modded eggy with a wierd *** board that goes a little faster than a stock halo, but yea it will so you down just a little bit, just put ur eyes on AUTO when ur playing thats what i do

[corebu]

cool i found out a way to test your eyes. This worked for me, with eyes on try walking your trigger with one hand amnd with the other hand you move the bolt back and forth.

[coolblondeguy14]

take the bolt out , and just wiggle ur finger...... better yes this isnt a new thing

[pro_balla70462]

Originally posted by CRaKeR
no u can't test ur eyes that way...the eye actually has to cycle paint its the only real way to test it

Actually your incorrect. The eye will detect reflections of any kind. If you stick your finger in there and wiggle it a little, the eye will work correctly and sense your finger. The bad thing is, it sounds like this kid's eye is broken. Check your board and make sure its plugged in correctly. If so, check the EYE wires and harness for any splits or shorts of any source. Sounds like an eye problem for sure.

[mineshootsfaster]

no ive been havin trouble with my eye and to test it i just take it out of the cover and put your finger infront of it. if it doesnt work make sure the wires arnt ripped or pinched.

[insideNout]

definitely check your lcd and make sure the sensor is on.. lol.. sometimes ur smallest problems are your worst enemies

[coolblondeguy14]

move ur finger and click at the same time.. put it on "rate", so u know if it goes past 1