[John S.]

Originally Posted by jjdustr340

Thank you sir, I knew they went out of production, I was just hoping there were still rebuild kits around. Such a great reg.

I really wish I had a better lead for you on replacement parts. I have some experience with the reg. and have checked out a few at an event. How familiar are you with it and are you comfortable taking it apart?

[jjdustr340]

Originally Posted by John S.

I really wish I had a better lead for you on replacement parts. I have some experience with the reg. and have checked out a few at an event. How familiar are you with it and are you comfortable taking it apart?

I'd have no issues with breaking it down what so ever. I'm guessing maybe you have a couple ideas for me?

[Aimless85]

Originally Posted by John S.

Yes, the Pro Burst disc is compatible and has the same thread pattern as the standard burst disc used on the Ninja regulators.

The function and performance of the Pro Burst disc is the exactly the same as traditional burst discs. The only difference that was made was the profile and overall aesthetics of it.

thx!!

[ycpb]

i got a myth2 on my ga tank. i get this really annoying ping sound when i shoot.. is there anyway of fix that?

[tbone833]

I have a Myth G2 that is leaking from the hole in the guage. I have rebuilt the entire reg and it is still leaking. It is not as bad as it was before but still leaking. I also need to know where I can get a new gauge because I was impatient and scratched the gauge up taking it off. The micro fill nipple is also leaking so I replaced it with a standard nipple. I would like to put the micro back on but it continues to leak. I am at a loss.

[John S.]

Originally Posted by ycpb

i got a myth2 on my ga tank. i get this really annoying ping sound when i shoot.. is there anyway of fix that?

The ping does not affect the performance of the regulator but yes, it can be annoying. There isn't one definitive way to resolve this. Sometimes it just requires replacing the mainspring or the piston or both.

For more information, email me at john@guerrillaair.com

[John S.]

Originally Posted by tbone833

I have a Myth G2 that is leaking from the hole in the guage. I have rebuilt the entire reg and it is still leaking. It is not as bad as it was before but still leaking. I also need to know where I can get a new gauge because I was impatient and scratched the gauge up taking it off. The micro fill nipple is also leaking so I replaced it with a standard nipple. I would like to put the micro back on but it continues to leak. I am at a loss.

Email me at john@guerrillaair.com

[W.C. Shooter]

I have a g2 reg with an lp spring, and I want to replace it with an elop spring. Can I put the lp spring from the g2 in my hp myth reg to make it lp ?

[John S.]

Originally Posted by W.C. Shooter

I have a g2 reg with an lp spring, and I want to replace it with an elop spring. Can I put the lp spring from the g2 in my hp myth reg to make it lp ?

Besides the LP spring you will also need to change out the seat retainer on your HP reg to complete the conversion to LP.

Contact gio@guerrillaair.com for more info.

[INXS17]

Question for John,
I bought a G2 at the Decay of Nations this Sunday at S.C. Village.
They didn't have any of the ELOP spring kits so they said I would have to contact my closest/local shop and order it and pick it up, here's the problem...I live in Palm Desert CA, I'm two hours east of ANY paintball shops.
The closest shop is mountain view paintball who refuses to sell anything G.A. so do I realy have to make a four hour drive there and back and waste all that gas for a ELOP kit or can I just get one sent to my house. I am gladly willing to pay shipping and for the spring parts themselves. Any help would be appreciated. Thank you.

[Gio24Dude]

Originally Posted by INXS17

Question for John,
I bought a G2 at the Decay of Nations this Sunday at S.C. Village.
They didn't have any of the ELOP spring kits so they said I would have to contact my closest/local shop and order it and pick it up, here's the problem...I live in Palm Desert CA, I'm two hours east of ANY paintball shops.
The closest shop is mountain view paintball who refuses to sell anything G.A. so do I realy have to make a four hour drive there and back and waste all that gas for a ELOP kit or can I just get one sent to my house. I am gladly willing to pay shipping and for the spring parts themselves. Any help would be appreciated. Thank you.

E-Mail me and I can help you out.

gio@guerrillaair.com

[Gio24Dude]

We are going to be at world cup, but in my free time I'll pop in here to check on you guys

[i8somepie]

Hey Gio. We have a GA tank in the shop here and the gel coat is cracking. Do you guys do anything about it? My boss has sent emails to both GA and TA with no response.

Enjoy Florida and Cup!

[techer200]

I just bought a 62/3000 air tank from action village. The 1.8k burst disk busted 8.5 hours after it was filled. I spent 3 bucks on a fill. Action village wont even talk to me about it and was rude with me. How do I get a new disc and 3 bucks for the fill i never got to use? I would actually like to return it but like I said action village says they dont warrentee any of the products they sell. I wish I would have bought it used and saves some money. Please help ASAP! Thanks for your time.

[glaz96]

I have a guerrilla 68/4500 and it leaks from the 1.8 burst disk and makes a pinging noise when i shoot, is there anyway to fix those?

[Rmilledge32]

Has there be an issue with the G1 myth regs blowing noids on peoples guns? i just got mine back from the shop with a brand new noid 2 days ago.. took it out last night aired it up slowly with the asa and getting noid leak again... he aired it up with a crossfire hpa tank and dry fired it about 50 times and let me fire it to ensure there was no noid leak before i left the shop. So im starting to wonder if my tank is screwing up my noid.

[Dilfalicious]

My etha (after 12-14 cases) is still very inconsistant. +/- 20 at some points on a chrono. I use a stock barrel and tried multiple brands of paint to rule out the bore size issue. I own a guerrilla cf myth 68/45. there was some discussion on the myth regs being inconsistant? is there anyway i can fix that if that is even my problem

[Hectix]

im running a machine vapor so i need a low pressure reg. I only have a myth G2 at the moment, where would i be able to find the lp conversion and is it just the spring i need to replace?

[Renko]

Hey so I just picked up a sweet 68/45 myth G2 tank... uhhh and I took it to multiple local fields. After taking it to all of these fields; I have found that none of them even fit my fill nipple. It looks the same as every other fill nipple, and the filling hose slides just over half way on, but not securely on to fill the tank.

So what is up? G2 reg, none of my local fields can fill it because the fill nipple is just slightly too big to fit the filling hose onto. Whaaaaat

[inphu510n]

Hi guys

I'm curious about the color of the LP spring.
I bought a LP kit for my G2 reg and the spring was brass colored. There was also no engraving on the spring seat indicating the pressure.
Everywhere I've looked, the images of the LP kit show a silver colored spring.
Did I receive the wrong kit?

[Gio24Dude]

Originally Posted by i8somepie

Hey Gio. We have a GA tank in the shop here and the gel coat is cracking. Do you guys do anything about it? My boss has sent emails to both GA and TA with no response.

Enjoy Florida and Cup!

PM your email address and phone number to me and I'll have our service department contact you; we were a bit understaffed due to world cup, so I apologize for the delay.

Also Thank you, I did enjoy Florida