[skamastershane13]

so im very happy with my fusion and its treated me well for about 2 months now but just this weekend at the field i was having a little problem. my gun wont shoot for the first about 8 trigger pulls but after that, its fine unless i stop and wait about 5 seconds more. any ideas?

[JRJ2004]

hmmm... I'd send it back to DP, they'll fix it

[FDS.]

selenoid problem ask DP to send you a new one they will gladly do that for you

but before you do try a new battery and see if that will work


or buy my fusion

[Bushwood Bill]

Check all your wire harnesses connected to the board. It sounds like a bad connection, possibly battery, solenoid or eye wire.. If they are all connected good then give DP a call and they will take care of you..

[skamastershane13]

yeah, i have a tourney this weekend so i really dont want to send it in, but ill see what i can do.

[FDS.]

write them an email right now i mean right now and say that you need it this weekend they will get you a new noid

as said above:
replace batterey
push in eye/noid wire on the board
replace the noid

[Arstron]

Remove the trigger frame from the marker, on the back of the solenoid is a silver screw, unscrew this and lube any orings you see, put it all back together, reset your lpr regulator and you should be good to go.

A guy on FOG just posted that this is what he did before getting his new solenoid out of the parts kit. So please try this and report back to let us know how it works.

[FDS.]

i tryed that with my old noid and that screw is a ***** to get out

which screw do you get out???

[RHChan84]

sounds like a noid problems.

[skamastershane13]

im currently trying what arstron said. im out of air so ill let you guys know how it goes when i get some


and if i ask for a new noid, do i have to pay and if so, how much?

[FDS.]

still email DP about it just to make sure

they no what they are doing

[skamastershane13]

theyre sending me a new noid tomorrow!

dp ftw

[FDS.]

is it going to be at your house by firday???

[Arstron]

Still try the current noid and let us know how that works!

/wishes his fusion wouls mess up so he could try fixing a fusion for once

[FDS.]

send it to me and ill have it broken in no time

[FusionKid11]

Well I think i know why your gun is not working.
Its neither
1) The battery is dead
2)Check the cocking part.

Did you do these things, and it still doesnt work, Like anyother post in this thread, Email DP.

[FDS.]

Originally Posted by FusionKid11

2)Check the cocking part.