[SkElL~ObIsSiS]

classic impulse, WAS board, all NDZ internals, jackhammer 2 LPR, eclipse blade trigger, Evil detonator....

Massive FSDO, and shoot down after 4 shots. Very inconsistent. the regulator needle is bouncing all over hell from shot to shot. The Det is broken in, i'm thinking i may have some **** in the reg? i just had my ram apart game before last and stripped and re-lubed it.

am i on the right track?

thanks,

-Tony

[Romulus1]

def hit the detonator and clean it out and relube it, if your tanks reg is rebuildable i might consider doing that as well, if you got the ram already your heading down a good path, from what i understand too much lube on a ram can cause fsdo as well but i would check those 2 things, if the regs gauge is boucing you probably have some inconsistant flow going to it. rebuild and relubes are your best friends with imps

[SkElL~ObIsSiS]

i was very careful when lubing the ram to put almost an almost invisible amount on, I've put too much on in the past and learned my lesson.

-Tony

[msonic]

You can put a decent amount on the ram. After cycling it a few times while aired up, degass and remove the cap to the housing and take a qtip to remove any excess that has built up there.

New battery.

Check your solenoid filter. The filter resides in the tube where the tapeworm or lpr nipple would be inserted. If that filter tube is scrunched up, it can make airflow erratic and cause fsdo, shootdown and/or inconsistent velocity.

[SkElL~ObIsSiS]

thank you oh master with the blue!