Ok kids, heres the skinny on v3. Parts start shipping today. Here's a new plan from Machine.
1) Make sure your gun is registered on the Machine website, if you have an original v1 Vapor with no serial you need to send email to
jay@machinepaintball.com to get it registered to you.
2) Send email to
TECH@Machinepaintball.com with the subject line as "v3 parts", only thing you need in the body of the email is your name, the Vapor serial number and your shipping info.
3) We will reply to confirm we got your email, and ship out your stuff.
We had to modify the original plan because there are simply too many Vapors out there still registered to the old owner and have not had the registration updated by the new owner. This change will ensure we are not sending out parts that will never be used and help to keep registration updated properly.
Remember patience is a virtue. Sooner you get that email in the sooner you get your stuff!
The v2 parts were the new flatfaced bolt and a new tophat for the regulator.
The v3 parts are a voltage regulator for the Rampage board and an improved firing can for the bolt assembly.
The new parts will be provided to you at no charge from Machine as long as your gun is registered properly.