Originally Posted by Devlin123
well, I have a couple of ions and draxxuses
waiting to be put on the chopping block together with some airsoft parts so... I might be partial
one is a dragunov, which only waits for me to chose what mags to use, currently leaning towards the dmag or dam-mag. Waiting to se what kinds of magwells people make to know what would look better.
The Dmags and DAM mags are very similar,the real difference being the build quality.
The DAM mags are the toughest of all mags I've found,convinced I could drive my car over one and it would survive.It also has a neat feature that has a trapdoor to keep paint and dirt out of your mags,something other mags don't have
The DAM magwell is also pretty robust and good quality and the mag release is ambidextrous.You can purchase them from Dye for around $35 shipped,I had to ask the tech line to get some
The real trick to making a homebrew magfed is getting correct spacing from the mag follower to the breech,if your using an Ion with eyes it should help when firing eliminate partial feeds.I'd also recommend NOT using a QEV,on Ions it will help with partial feeds and chops.
Basically the bolt will only partially cycle&reset if there an obstruction without a QEV